Just installed a new command board with cruise and sound in a atlas engine last week. it runs fine for 4 or 5 min then wont start on speed step 1, need to go to step 2 or more, soon after engine stops wont go in any direction and head light blinks fast. Had the antenna at a few locations and even attached it to the old atlas plate. Have taken shell off with antenna open for signal. Cycle power off will work a few min then same. I can run older TMCC and Legacy all day long and no problems. could it be a bad board or maybe a bad batch of software? I could use some help and a great thanks in advance.
Tom
