Has anyone using the chuff generator had it change chuff rate after an engine not being used for a while? I installed it in my 606 TMCC J and it has been working great @4 chuffs per. Tonight I put it on after about a year of sitting unpowered and it was at 2 and there seemed to be some sporadic chuffs as well. I took off the shell and checked that the sensor was still secure and the tach strip was good. Both seemed fine. Before I reprogram it for 4 chuffs again I thought I’d inquire if this is something I need to be aware of in the future.
Maybe @gunrunnerjohn will chime in. It’s a great product so I suspect it’s a simple reprogramming but thought I’d ask.