How do i know if my MTH GG1 has protosound?

John , do you have the MTH number beginning with 30 - _ _ _ _  for the Railking GG1 ? 🤔

Hi Dallas! Yes, the number is 30-2507.

That GG1 is an older model with a an electronic reversing unit and horn. The DCS Explorer is only compatible with Protosound 2 & 3 engines that were manufactured 2000 or later. This GG1 came out in 1998.

The reason you only hear the horn is because the you are using a DC power supply to operate the explorer. When the engine sees power from the DC supply, it sees the DC offset caused by a horn button on a transformer and continuously blows the horn.

Hi H1000 - thanks for your reply. Does the PS1 do anything besides have an obnoxiously loud horn, or can it do sounds?

How can i make it work better?

@John m 43 posted:

Hi H1000 - thanks for your reply. Does the PS1 do anything besides have an obnoxiously loud horn, or can it do sounds?

How can i make it work better?

Well what you have isn't exactly PS1. It only has and electronic horn.

Protosound 1 has a whole plethora of functions from Passenger & Freight announcements, squeaking brakes, electrocouplers and more.

To operate this engine you'll need a traditional AC transformer with a whistle button.

Actually, i normally run it with two CW80 transformers from Lionel, and those work well. Would that be a "traditional AC transformer with a whistle button" like you say?

@H1000 posted:

Well what you have isn't exactly PS1. It only has and electronic horn.

Protosound 1 has a whole plethora of functions from Passenger & Freight announcements, squeaking brakes, electrocouplers and more.

To operate this engine you'll need a traditional AC transformer with a whistle button.

I take that back, after reading the manual for your engine it may just have Protosound 1.  To operate the features of the engine, check out the operators manual:  https://mthtrains.com/sites/de...ction/30dl16675i.pdf

Alright, thanks. I'll have to try it out. I'll make a reply after i do with results.

@John m 43 posted:

Actually, i normally run it with two CW80 transformers from Lionel, and those work well. Would that be a "traditional AC transformer with a whistle button" like you say?

Yep, that should work!!

@H1000 posted:

I take that back, after reading the manual for your engine it may just have Protosound 1.  To operate the features of the engine, check out the operators manual:  https://mthtrains.com/sites/de...ction/30dl16675i.pdf

Looking at that manual H1000, I'm guessing by the battery type reqired, that this engine has the 5 volt boards !?! 

John , make sure you have a new battery or at least a fully charged one when running this engine.

If it's PS1 they run on the same 9V style battery as the early 5V PS2 boards. Make no mistake, it's made in 1998 which is easily 2 years before any PS2 equipment hit the market.

A simple battery test for a PS1 is to power it up but leave it in "reset" mode (don't hit the direction button to move it). let it idle like this for a few minutes at 12 or more volts and then shut off the power. If the engine completes the 7 to 10 engine shutdown sound cycle and you hear the faint "popping" noises afterwards, the battery is charged and the engine is ready to run.

Otherwise John, as has been said numerous times (just do a Search on this Forum)  if the battery isn't properly charged and you try running it you can fry the circuit board.

@H1000 posted:

If it's PS1 they run on the same 9V style battery as the early 5V PS2 boards. Make no mistake, it's made in 1998 which is easily 2 years before any PS2 equipment hit the market.

A simple battery test for a PS1 is to power it up but leave it in "reset" mode (don't hit the direction button to move it). let it idle like this for a few minutes at 12 or more volts and then shut off the power. If the engine completes the 7 to 10 engine shutdown sound cycle and you hear the faint "popping" noises afterwards, the battery is charged and the engine is ready to run.

ok, I will try this. Also, I bought this engine off some guy on Facebook marketplace who didn't mention anything about a 9V battery. Would i have to put one in? I've heard of people putting large capacitors in the PS1 engines to stop the circutboard from being fried.

@PH1975 posted:

Otherwise John, as has been said numerous times (just do a Search on this Forum)  if the battery isn't properly charged and you try running it you can fry the circuit board.

I have heard about this. I just don't knw if the 9V was replaced with some of those large capacitors or not.

This is an image of the insides of my GG1, maybe it will help figure out what's going on here. It doesn't look like any images of MTH GG1s I've seen on google images. @H1000 @Dallas Joseph @PH1975

The manual for this locomotive is confusing since it states that it could be an LCRU OR Protosound.  If you don’t have the box telling you what it is the next best option is to open it and post a picture as John m 43 suggested.

@Danr posted:

The manual for this locomotive is confusing since it states that it could be an LCRU OR Protosound.  If you don’t have the box telling you what it is the next best option is to open it and post a picture as John m 43 suggested.

Thanks for that Catch Dan. I suspect that this is the model with Protosound because the Horn immediately blows when DC power is applied.  PS1 engine startup in "Reset" mode and the horn won't function until you leave reset mode.

Here's a re-upload of the engine photo in attachment form.