Hello,
From Rudy
This is what I got.
I am using a apple I phone.
This is coming up on the screen.
"Controls Disabled in Protocast Mode".
What should I do?
Thank You.
Rudy
Chuckkegel@yahoo.com
Original Post
Turn off protocast mode.
In the APP:
Protocast To activate this feature, you must first connect an audio source to the DCS system.
1. Plug a male-to-male mini cable (1/8” plug, like that used for the headset with a portable CD/ tape player or M.T.H. Item No. 50-1009) first into the Proto-Cast port of the TIU, then plug the other end of the cable into your audio source’s headphone jack or line-out jack.
2. Play the recording according to the audio source’s instructions.
3. Press the “PROTOCAST” button to play the recording through your engine. When the Proto-Cast feature is enabled, your regular engine sounds are silenced so that the recording may be heard clearly. A (C) appears on the LCD to indicate that Proto-Cast is in use. 4. Press the button again to stop the feature and return to normal engine sounds. You can use Proto-Cast in only one engine at a time (the active engineat the time the feature is selected). Because Proto-Cast uses a large share of the microprocessor’s processing power in the TIU, activating other features while running with Proto-Cast may cause interruptions in the audio.
DCS TIP: Because Proto-Cast sends such a large digital signal on the track, it is important that your track be clean when you run this feature. If you get popping and distortion while running Proto-Cast, please clean your track. The large digital signal also means that playing the audio source too loudly can result in sound distortions; resolve this by turning down the audio source volume.
Page 26 here: https://mthtrains.com/sites/de...ction/20as13831i.pdf
