Is there a DCS command for setting the headlight long hood forward on an engine?
I have three of the same engine two are correct...the other is reversed. Is there a command to set the headlight orientation correctly or is this a wiring issue?
Replies sorted oldest to newest
Not that I know of. Software is generally written as LHF or SHF. If they wrote one for Long Hood Forward, you could load that software.
I have three of the exact same RS-3's. Only one is displaying the headlight out of sync behavior. Couplers fire correctly front and rear and the other two engines are working correctly with this code.
Is it safe to assume this is a wiring issue and I need to swap the headlight wires?
Exchanged an email with a trusted source. Seems to be a wiring issue. Will pop the shell to resolve this.
@MichRR714 posted:Exchanged an email with a trusted source. Seems to be a wiring issue. Will pop the shell to resolve this.
Sounds like a plug issue, find the two for headlights and flip them. Are the number boards also backwards?
With DCC all that kind of stuff is programming and very easily solved. One of the benefits of an open system.
@prrjim posted:With DCC all that kind of stuff is programming and very easily solved. One of the benefits of an open system.
Geez! Are you guys ever going to stop beating this silly drum??? 
I seriously doubt that Charlie is going to suddenly convert to DCC, give it a rest please! 
Access to this requires an OGR Forum Supporting Membership
