Skip to main content

I have an MTH Railking Imperial Pennsylvania K-4 locomotive and for a while I have had a small problem, the eccentric rod or the hex screw on the fireman's side comes loose when the locomotive is operating. Yes I have tightened it but after a while it comes off again. Does it need a new screw? loc tite?

 

 

 

SAM_1159

SAM_1160

 

 

Attachments

Images (2)
  • SAM_1159
  • SAM_1160
Last edited by Blake
Original Post

Replies sorted oldest to newest

Originally Posted by PRRronbh:

One question, are you using a correct size metric wrench/nut driver and/or correct sized hollow grounded screwdriver/bit(like used in gunsmithing)?  I ask because from the picture it looks like the hex-screw has rounded corners.

 

Ron

Yes I do, I purchased this locomotive used and it was like that. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×