Skip to main content

6 replies

Matching Powered Santa Fe B unit (1999) 20-2151-4 to the PS1 A-B-A set from 1997. How does it sync?

D DdotCdotOGR Forum Member

I have a matching SF B unit with dual motors on the way now, which supposedly can run on its own (I  see it has a RVS Unit Lockout switch beneath), and it also has a tether... My matching ABA set  is Premier and came out in 1997. (I don't know the item number off hand, but it's the popular El Capitan set with Proto-1.) The A-B-A set is Powered-Dummy-Dummy. The tether only carries the rear coupler and directional lighting, as far as I know. When I hook up this additional Powered B unit to make the set A-B-B-A, how is it going to sync with the powered A unit beyond RESET/FWD/NEU/RVS/NEU/etc. - for instance during FYS or Station Announcements which automatically triggers a change in direction without another power cut?

Would like to know how this should work before I couple them and break something. Thanks.

Last edited by DdotCdot
Original Post

Replies sorted oldest to newest

G GGGOGR Forum Member

Normally for a PS-1 Powered A with Slave A or B, the 4 pin wires carry direction control signals via 3 of the 4 wires to the Slave DCRU (what is in your B unit) and the 4th wire is coupler signal (other coupler wire to chassis ground).  Lights of a slave unit are CV board controlled with a special circuit for the HL operation off the motor control circuit.

This would take some rewiring I believe. This unit may not be meant to work with yours.   Instructions may have some insight.  G

D DdotCdotOGR Forum Member
GGG posted:

Normally for a PS-1 Powered A with Slave A or B, the 4 pin wires carry direction control signals via 3 of the 4 wires to the Slave DCRU (what is in your B unit) and the 4th wire is coupler signal (other coupler wire to chassis ground).  Lights of a slave unit are CV board controlled with a special circuit for the HL operation off the motor control circuit.

This would take some rewiring I believe. This unit may not be meant to work with yours.   Instructions may have some insight.  G

Which set was this B unit intended to go with then??

Add Reply

Views: 388
Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×