Can anyone shed some light on an actual wiring diagram for this unit?
Even some shell off photos might be of great help.
I picked it up without any cabling in place and Lionel Archives appear to be no help.
It’s a 6-11136 Early Western Pacific Scale Mikado W/TMCC 4.0, Oddessy1, Semi smart smoke, & wireless tether.
It is such a beautiful piece; I just would hate to mess up the pin outs.
This Mikado needs to be strutting it’stuff again…
Any and All help would be most appreciated.
Replies sorted oldest to newest
Most Lionel motherboards have wiring info printed on the board. Use a magnifying glass and look near the plug receptacles.
Neil
Most Lionel motherboards have wiring info printed on the board. Use a magnifying glass and look near the plug receptacles.
Neil
still need help
anything will be helpful. There is no wiring in this engine so if you have a wiring digram you would be a life saver.
thanks
He has no wiring at all, so he needs the whole wiring harness. My recommendation was to find a locomotive with the same MB that has Odyssey and try to work from there.
I’d really like to see how far I can get.
I already have a engine that sees this tender.
I am a student and I have to make do.
I have all summer.
I will post on other forums and hope for the best.
If you take the MB part number and search the Lionel Supplements for an engine with the same MB and a wireless tether, you should come close to the wiring for the engine. You may have to guess at a couple of wires, but the wiring in general is very similar. Of course, the Odyssey magnetic ring and/or encoder may be bad on the motor, which would steer you to perhaps at least an ERR Cruise Commander M replacement for the DCDR-S that drives the motor with Odyssey.
This is all guesswork without having the locomotive in hand.
If you have access to the exact connectors used in the engine, it's not impossible to recreate the harness, but it'll take some work.
Access to this requires an OGR Forum Supporting Membership
