Skip to main content

4 replies

Questions for someone coming back to trains.

M medelmanOGR Forum Member

I've been a fan of model trains for most of my life and about ten years ago I bought a lionel steam engine starter set which included TMCC built into it but came with a conventional power pack. I don't recall the name of the set as it is currently packed away. I've been hoping to set it up again and then moving forward start adding more sets and/or engines. I'm a firmware engineer and have actually worked on bluetooth development so the whole new lionchief plus 2.0 looks great. The question I have is am I still going to need a cab1/cab2/legacy system in order to control my original tmcc based engine remotely? 

I never had any switches for fasttrack but am debating on getting command control switches if I stick to fasttrack. I don't have much fast-track so that is up in the air. Again I'm assuming that my only option for controlling these is with a command control system? Can a non legacy command system control these switches or only legacy based?

Thanks,

Matt

Original Post

Replies sorted oldest to newest

gunrunnerjohngunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Yep, for the old TMCC locomotive, you'll either TMCC or Legacy.  Fastrack command controlled switches require you to have a TMCC or Legacy system.  TMCC can run any TMCC or Legacy locomotive or accessory.  What you might miss out on with TMCC vs Legacy is some "Legacy only" features, the quilling whistle comes to mind, as well as enhanced lighting and sound features on some Legacy locomotives.

Last edited by gunrunnerjohn
B bmoran4OGR Forum Member

Your existing TMCC locomotive can be controlled to its full capabilities by a TMCC or Legacy system. It can also run in conventional mode, but that appears to be outside your desire.

LionChief+ 2.0 introduces TMCC capabilities built into the engine - that means the engine speaks the TMCC protocol and can (amungst other methods) be controlled by a TMCC or Legacy remote.

The LionChief family of remotes will only control LionChief family of locomotives and does not interface with any TMCC/Legacy components.

Most newer Legacy engines support being controlled by Bluetooth/LionChief, but it is possible that all advanced legacy features are not exposed through that interface.

Might want to check out this thread with details:

https://ogrforum.ogaugerr.com/...-to-lc-2-0-to-legacy 

 

Add Reply

Views: 478
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×