Skip to main content

Replies sorted oldest to newest

This weekend our interurban group will be running  vintage Christmas trips bringing the families for a short ride from the station down the line and back into the car barn to see "Father Christmas Workshop".  I set up my 2nd model railway for the holidays, a 8x12 foot layout with 3 loops of O and 1 of On30 some cardboard buildings and a couple of animated accessories.  The outer loop has a Great Northern Steamer similar to what ran on the Great Northern Rail Line that originally ran nearby and had a station next to the Interurban line as a connection to the valley. Trying to keep the early 1900's theme. Santa's elves are working on wooden trains on the work benches. There are now 4 Vintage Interurban cars in the fleet; details on the website for the Fraser Valley Heritage Railway. Click on a photo for larger views.

https://fvhrs.org/

fv1fv2fv3fv4fv5fv6fv7fv8fv9

Attachments

Images (9)
  • fv1
  • fv2
  • fv3
  • fv4
  • fv5
  • fv6
  • fv7
  • fv8
  • fv9
Last edited by kj356

Happy Friday!!!

Santa came early for me this week :) Picked up a restored 2332 & a trio of LTI Madison cars. That original horn on the 2332 leaves a lot to be desired. Even w/ the single motor, this engine has some pep.
Image

Image

Image

Image

Image


681 w/ the 2671W tender leading freight & passenger consists through town 
Image

Image

628 NP 44 ton switcher leading 1956 set 1545
Image

616 Santa Fe NW2 working the factory
Image



NS SD40-2 3357 (ex CR 6409) leads a power move into South Yard in Roanoke, VA
Image


NS SD60M 6798 (ex CR 5560) leading 188 through Northfork, WV on the Pokey 
Image

NS SD40E 6325 (ex CR SD50 6715) shoves 17G under the PRR signals at Latrobe, PA
Image

NCDOT/Amtrak F59PHI 1755 brings up the rear of Raleigh bound Amtrak 76 as it heads through Lexington, NC
Image

On Monday December 18, 2017 the new Amtrak Station will open in Tacoma.  The old station is about the size of a Burger King, it opened in the 1970s to replace the iconic Union Station which still exists but re-purposed to a court house.  The new station was built in a section of an old Milwaukee Road freight house that was near the old Milwaukee Road Station that is long gone.  The new station is on a new route through Tacoma that will allow Amtrak to save about 10 minutes of time between Seattle and Portland. Unfortunately, the route no longer will go along the water route along Puget Sound but that was also an area highly congested with freight traffic.   The other part of the project was to replace the 100+ year old Milwaukee Road Trestle, which was being used by the Sounder commuter train between Seattle and Tacoma.  That ride coming into Tacoma was better than any Disneyland ride with all of the rocking and rolling on the trestle, especially if you were on the upper level of the train.  The new trestle is a double track and also extends the length of the new passenger station so it can accommodate the longer Amtrak trains.

Here are some pictures:

This is the area that had been opened up in the Freight house for the station.

20160921_172826

Part of the old Milwaukee Road Trestle, part of the new trestle is behind the old one,  it was made operational before the old one was torn down so there there was no major disruption to the Sounder Train which was still using the line. 20170215_165728

Here is a rendering of the new trestle that was expanded to include the passenger platforms

20170525_165443

A Sounder entering Tacoma, the work on the far side was to create new passenger platforms. 

20170714_170059

The front of the new station has a huge mural.  

20171214_170249

Here is the other part

20171214_170337

This is what the station looks like on the street side.  If you arrive in Tacoma by train, you can take the light rail directly to downtown Tacoma. The light rail station is right across the street.    

20171214_170418

The station can accommodate two sounder trains.  The one on the track is heading north to Seattle.  

20171214_171330

This is a peak inside of the new station. 

20171214_170711 

 

    

Attachments

Images (10)
  • 20171214_170711
  • 20171214_171330
  • 20160921_172826
  • 20170215_165728
  • 20170525_165443
  • 20170714_170059
  • 20171214_170249
  • 20171214_170337
  • 20171214_170418
  • 20171214_171330

I am finally constructing/upgrading the buildings to be used in the town of Port Royal. First is an MTH corner pharmacy. First photo shows the stock building, and the next two show the building after the clunky base was removed, and the brick painted and mortared, lintels painted, and window shades added. Roof detailing was also added, but isn't visible in these photos. The structure was also weathered, and I have yet to install a new interior, including floor and details.

Corner_Pharmacy53463282570__02571826-C93D-4B6B-B624-0015BC6B5ECB53463278847__175936C5-0162-4E89-9A38-E4DE3EC46BE7

Attachments

Images (3)
  • Corner_Pharmacy
  • 53463282570__02571826-C93D-4B6B-B624-0015BC6B5ECB
  • 53463278847__175936C5-0162-4E89-9A38-E4DE3EC46BE7
Last edited by PRRMiddleDivision

What a beautiful restoration Christopher. I still have one that came to me in my hobby shop years ago. It was a true basket case that was included (along with a 2356 Southern ABA, an 0-4-0 slope-backed switcher and other O gauge items) in two cardboard boxes found on the dirt floor of an outdoor shed in rural Louisiana. My service guy George rebuilt everything and we painted the GG1.  Somehow, it got set aside before I could apply the Janice Bennett dry transfers I have for it. Seeing this one just may inspire me to finish the old gal after all!  You'er right about the operation with the single motor and 'rat tail' horn. My horn triggers often on its own as the unit encounters voltage hits somehow..

Last edited by c.sam

Once upon a time long, long ago, I bought an MTH set of PRR Premier heavy weight passenger cars and added 2 more cars for a 7 car train.  You may be able to see that they were dark green!  This was long before I became more focused on more realistic and accurate PRR trains.  I eventually sold those to a party who wanted to run them with a S2 steamer or a GG1.  I now have some K-line heavy weights, a couple of weaver B60 express mail cars and an MTH RPO and an MTH passenger baggage combine.  I found this photo while searching for another photo.  This photo was taken before I added a siding in the area shown and before I planted some trees and changed a lot of scenery. This train was hauled by a Lionel PRR Pacific that I gave to one of my brothers. I now have a K-line scale Pacific and a Lionel scale Atlantic for passenger trains.

passenger6

Attachments

Images (1)
  • passenger6
CAPPilot posted:

The big Decapod is rolling out with a mixed freight in the 1950s.  The picture is not dated, but the Merchandise Service boxcar in the phase 2 scheme behind it dates the picture to after January 1950.  The Pennsy built 598 of these big engines, and they lasted until the end of Pennsy steam in 1957.

MTH PRR Decapod Front

Ron, who manufactured that Decapod? It is really nice.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×