could some one help me with a wiring for dumbies on bascale bridge . I know I have to insulate the track on both sides but not sure on wiring. It's the newer version where it wires from bottom. Could I use the wires that connect to the track and jump power to the track power in the bridge or what do I do.
Replies sorted oldest to newest
The manual with the wiring diagram is here at Lionel 6-37920. 2nd page for track setup, 3rd page for wiring.
If you have problems, someone will help to get it to work right.
If I wanted to hook up the bridge direct with a button without using insulating pins would everything still work
Access to this requires an OGR Forum Supporting Membership
