I run all MTH engines on my layout (DCS). During today's session my ProtoSound 3 Penn F7 ABA units just quit all sound functions during the run. I am in Tupelo, MS and have no dealers within 200 miles and am not electronic savvy. This is a new problem as I have had no sound problems with PS 2 engines of which I have a dozen. Any suggestions would be appreciated. Thanks.
Replies sorted oldest to newest
Are you running any other systems simultaneously like Legacy etc.
I would set up a test track and try to see if I had a hardware or software error.
I would also shut everything down , get all other systems off and try again.
Mike
Menu/Advanced/ reset engine/ feature reset. Good luck.
Is there any chance that this occurred right after a DCS signal test? That can be fairly common occurrence for some DCS engines.
Regardless, I agree with Gregg. Unless something has failed (speaker, audio amp), a Feature Reset should bring back your sounds.
Access to this requires an OGR Forum Supporting Membership
