I have one MTH Premier 3.0 GP-38 and a Rail King 3.0 RS-1 that appear to have the same address. When ever I start one, they both start. When I move one, the other moves. I have deleted the engines from the DCS Remote and then added them back to the DCS remote, but they still do the same thing. Any advice on what to do would be helpful. Thanks!
Replies sorted oldest to newest
Actual I would do a factory reset on both one at a time. Turn power off after the factory reset and place engine on the bench while doing the other. Same with shutting off power which lets factory reset get written to memory. Make sure they both play shutdown sounds when power is turned off. Then readd with only one engine on the track at a time. G
Access to this requires an OGR Forum Supporting Membership
