Add a DZ 2500 to a manual Ross switch

Matt15237OGR Forum Member

Hello,

Can I add a DZ 2500 machine to a manual Ross switch or do they do something different to their remote switches? I have the DZ 2500 machines already from another brand. Rather than spend the extra money on the remote Ross switch I was hoping I could add them to the manual Ross switches.

Thanks

3/10/139:01 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Doug NOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

If I understand you correctly, yes you can put DZ 2500's on Ross switches.

Doug

3/10/139:16 PM

❤️ 0

Matt15237OGR Forum Member

I was not sure if the manual switches are setup differently at the factory from the remote switches or if the remote switch is just a manual switch with the machine added.

3/10/139:26 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!