Skip to main content

1 reply

BCR with a CW80

W WaterLevelRoute38OGR Forum Member

Hello all,

i just put a bcr in my PS1 1113lpk dreyfuss, I am currently using a CW80 to run it (have had no problems) but also have a spare MRC Tech ii 2500 from my HO scale layout to use. I have 2 questions (one stupid, one semi valid (. First question is, how is 10 volts indicated on the CW80, is it the 10 on throttle? Second, more valid question is, can I use the tech II to run this loco, the MRC Tech II is listed as supported, but given this is a DC model (2500) will it work?

Thanks for any and all answers,

Nich

Original Post
ADCX RobADCX RobOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
@WaterLevelRoute38 posted:
First question is, how is 10 volts indicated on the CW80, is it the 10 on throttle?

Use a multimeter / VOM.  The 10 volts you need is the minimum, without a load, the CW will put out ~17.9 volts at full.  If you look at the wave form, the BCR should charge at below 10v as well off the peaks.  I'm surprised you have had success w/ PS & the CW-80.

@WaterLevelRoute38 posted:
Second, more valid question is, can I use the tech II to run this loco, the MRC Tech II is listed as supported, but given this is a DC model (2500) will it work?

No.  Besides being DC, it's only 2.5 amps.

Add Reply

Views: 359
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×