Skip to main content

@sdmann posted:

Hi Folks,

Diners, Head End (Baggage / RPO / Combine), Observation Cars were made in 2019 and the tooling exists, and can all be made in a subsequent run after these. That way we can announce all the successful roads of this run in future runs. All our tooling is moving into our current car manufacturer.

In the previous run of 2019, we improved our 3R coupler assembly, and these cars will enjoy that upgrade as well. I am thinking to supply the Kadee mounts and screws in each 3R box as well.

Clerestory and Arched Roofs: These car bodies are assembled, not a one piece plastic part, the roofs are screwed on to the car from below, so I could make extras and customers could buy roofs separately and change out their Clerestory for Arched and visa versa at will.

These cars are all based on accurate PRR cars, then we offer them in a generic form for all other roads. Sometimes we will be close, sometimes not, it all depends on what you want for your layout or collection.  I think it's going to be a fun project for us and our customers.

Cheers,

Scott Mann

I’ll take 5 arched roofs, Scott. Would you be offering floors and trucks as well?

@Purplepapa posted:

Just a few suggestions:

20240331_145143_Original20240331_145153_Original

I would absolutely buy this one in an undecorated Pullman version.

I think the Cuyahoga Valley Line ran one of these (along with a couple of 12-1 Heavyweights) when they were running 4070 and the ex-Pennsylvania P70's.

Can anyone verify? I'd drop some photographs to illustrate what I'm after, but it's against forum rules and regulations.

Just gonna throw this out there, anybody want a more luxurious heavyweight sleeper? I’m thinking the 6-3 (6 compartments 3 drawing rooms) or the 7 drawing room sleepers found only on a few of the most luxurious passenger trains.

12-1’s were a sectional sleeper & 8-1-2’s were a sectional/ bedroom car. Thinking an all bedroom car would be a sweet addition to the fleet.

see them here http://www.northeast.railfan.n...lassic/CARdwgs4.html

Last edited by Dj'sOgaugetrains

Just gonna throw this out there, anybody want a more luxurious heavyweight sleeper? I’m thinking the 6-3 (6 compartments 3 drawing rooms) or the 7 drawing room sleepers found only on a few of the most luxurious passenger trains.

12-1’s were a sectional sleeper & 8-1-2’s were a sectional/ bedroom car. Thinking an all bedroom car would be a sweet addition to the fleet.

see them here http://www.northeast.railfan.n...lassic/CARdwgs4.html

I hope everyone gets what they want.  What I want to see though are the basic cars that you would see on workaday trains rather than the top of the line equipment that tended to be reserved for the flagship trains.

Can someone please tell me more about the “Postwar” Heavyweight Passenger cars?

Kyle - A Fellow “Rail-Nerd”

This thread discussion is all about Sunset/3rd Rail/Golden Gate Depot SCALE heavyweight passenger equipment, i.e. generally 21" long cars. The "postwar" cars you are asking about would all be Lionel non-scale pieces, generally referred to as "Madison Cars".

@Hot Water posted:

This thread discussion is all about Sunset/3rd Rail/Golden Gate Depot SCALE heavyweight passenger equipment, i.e. generally 21" long cars. The "postwar" cars you are asking about would all be Lionel non-scale pieces, generally referred to as "Madison Cars".

Did you look at the golden gate websight? There is a “postwar” coach offering in many road names.

@Hot Water posted:

Sorry but, there is NOTHING "postwar" about Golden Gate Depot SCALE heavyweight passenger cars! I must have had a dozen or more of their SCALE passenger cars, over the years.

I have a lot of their scale plastic & aluminum cars too and this is not the first time Golden gate depot has used the term postwar. Meaning a scale replica of a train car made or modernized post WWII. You remember the pre and postwar Broadway limited offering?

If you’re referring to Lionel’s postwar products, yes it’s a completely different product. And I’m only referring to what’s on the golden gate depot websight so maybe relax & enjoy the thread…..

@Hot Water posted:

Sorry but, there is NOTHING "postwar" about Golden Gate Depot SCALE heavyweight passenger cars! I must have had a dozen or more of their SCALE passenger cars, over the years.

Yes postwar is referring to a scale model of Pullman built heavyweight cars as they appeared in the postwar years after they had been converted to sealed windows with air conditioning.

The top car is what GGD is referring to as a prewar car with the clerestory roof and small windows, while the car on bottom is a modernized "postwar" car with the rounded roof to accommodate air conditioning ducts and to better match streamlined equipment as well as large picture windows. Both cars were built in the 19teens but the green car would've been modernized in the 30s or 40s.

NOTE:  pictures removed due to possible copyright infringement per the OGR TOS.

Last edited by OGR CEO-PUBLISHER

MOPAC and NdeM Sleepers

There were some posts about the NdeM and Scott added them and then he added the NdeM Alco engines. I love it.

One thing I have found is that there is a wealth of NdeM sleepers and Mopac Sleepers used in the St. Louis to Mexico City run. I'm hoping to add whatever limit Scott puts on sleepers. There are some great Spanish road names for the City of Mexico, Aztec Eagle trains.

MOPAC and NdeM Sleepers

There were some posts about the NdeM and Scott added them and then he added the NdeM Alco engines. I love it.

One thing I have found is that there is a wealth of NdeM sleepers and Mopac Sleepers used in the St. Louis to Mexico City run. I'm hoping to add whatever limit Scott puts on sleepers. There are some great Spanish road names for the City of Mexico, Aztec Eagle trains.

Were you aware Scott has done NdeM F3s (2runs) and a NdeM 10-6 as an “extra”in the GGD Texas Eagle offering ???  The MP Budd with 6 wheel trucks ran on the Aztec - was also available as an “extra”.  This 10-6 will reprise in Jenks when those cars are done. (Scott has stated they will be offered) A NdeM 10-5 is likely too.
Check out the “GGD Missouri Pacific   Eagles …. “ thread and you’ll find NdeM bits here and there in the thread.
Be aware the only heavyweight cars GGD are doing are those with existing tooling. If you have NdeM pix to contribute, please post links to them. If you have some good published references, those are also appreciated.

Cheers 😉

https://ogrforum.ogaugerr.com/...6#184297498767049366

Hey Greg, Yes, I have the extras from the Texas Eagle offering.

I emailed Scott and told him I would share all the MOPAC and NdeM pictures and stats I have when he is ready. I know there will be MOPAC, but, I know he can only do so many sleepers and there were dozens of sleepers used on the runs from St. Louis and then NdeMs were added from the NdeM. Right now I have 32 heavyweights reserved between the T&P, MOPAC, NdeM, and S.P. But I will order more MOPAC & NdeM Sleepers if more than 4 of each are offered.

I missed out on the F3s. I moved up to GGD and 3rd rail in 2020.

Also trying to increase interest and reservations on the forum.

Greg, Dallas TX

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×