Skip to main content

4 replies

CAB1L problem

N NorcentmanOGR Forum Member

I posted this query on another forum but got no reply.  Perhaps I'll have better luck with OGR.
I have successfully installed a 991/992 legacy command set along with an original command base attached. The Cab2 boots up on channel 1 and successfully talks with the 992 Legacy command base. My older Cab1's work successfully. I recently purchased a Cab1L which is supposed to work with the 992. However, I can not get the Cab1L to talk to the 992. I get the dreaded 3 beeps when I set channel 1 on the Cab1L. I have fresh batteries in the Cab1L. Any suggestions?

Original Post

Replies sorted oldest to newest

M MoonmanOGR Forum Member

I would turn off the trainmaster base and the Cab2 so that only the Legacy base and Cab1L are on.

 

Secondly, use channel 9 on the legacy base. There are too many other devices in the lower channel range of Wi-Fi. It could be some strange interference issue.

 

Other than that, it sounds like you are doing the process correctly. Hold set, press the number of the channel, wait for the beep(s) It's a hold set, press and release the channel number. Don't release set until the beep(s)

Last edited by Moonman
N NorcentmanOGR Forum Member

Thanks to all who replied. It seems that Ron "hit the nail on the head".  Lionel had sent the up-grade modules to me a long time ago, but I never knew exactly what I had.  I looked again and found that they were to up-grade to V1.3.  I took me a few minutes to find what to do in order to up-grade and another few minutes to actually up-grade.  But, when finished, my CAB1L started talking to the base just fine.

Add Reply

Views: 342
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×