Gents-
How do I pull up the miles and hours for a particular engine?
Thanks in advance....
Original Post
Replies sorted oldest to newest
Advanced Menu and scroll to "info" and select for the engine desired.
Or, use ENG soft keys DOD (Odometer) and DCH (Chronometer).
Select engine... go to the "more" softkey./ scroll down./ select Odometer or Chronometer
you guys rock! Thanks fellas!!
Barry,
Are these Soft keys labeled in your book that I have?
Thanks,
Joe
just remember, the hours are running up on the meter anytime the track that engine is sitting on is powered. I believe that is regardless of whether the engine is "on" or not. Perhaps someone can verify.
Paul
Originally Posted by Railrunnin:
just remember, the hours are running up on the meter anytime the track that engine is sitting on is powered. I believe that is regardless of whether the engine is "on" or not. Perhaps someone can verify.
Paul
Yes, bought a used MTH Proto 2 engine with 20 miles & 300 hours because the original owner (nor us!) knew it tallied hours when shutdown with power on the tracks.
Joe,
Are these Soft keys labeled in your book that I have?
Yes, they are.
They're on page 207, Appendix D: Soft Key List
