Latest TIU better signal to remote?

Do you have a lot or any wire(chicken wire/screen) to form scenery that could be interfering? or internet or cordless phone base near your TIU? These things can cancel out sent signals and wreck a clean connect for your train wireless performance

There's a good chance that, due to handling every holiday season, the transceiver board in the TIU and/or remote has lifted partially out of its socket. Connect the remote to the TIU's Remote Input port with a 4-conductor telephone handset (curly) cable. If problems go away, reseat the transceiver boards as described in your copy of The DCS O Gauge Companion (either edition). This and a whole lot more is all in The DCS O Gauge Companion 2nd Edition, available as either an eBook or a print book from MTH's web store.

Hey guys, thanks for the replies,

 

@rep56: Actually I have no scenery, this is a living room layout on the floor on the perimeter of the room. There is a TV in the room and DVD player & cable box, but wouldn't say they are near the TIU or are in the path. As well none of my furniture is metal.

 

@ Barry, thanks will look into this via the phone cord, but guess I should have described that this layout is out all year round and is/was just the way it has always been for years. Might say the remotes have been handled but kinda wonder that boards have been dislodged in both.

 

Basically as its been a while I might even say the way it is has always been this way but little hard to remember as its been so long.

 

So will try it with the cord and will look inside at the remotes too, but in the end though, am still wondering if the new TIU has anything like I asked?

 

Thanks