Skip to main content

I am in the process of completing a PS3 upgrade on a FM Virginian with a problematic PS2 5v board and am having a problem with the lighting circuits. For example, the back-up Mars light functions but the forward Mars light does not.

I have tried different PS3 sound files from the site, and have loaded the diesel chain file (which was probably unnecessary). The premier PS3 file offered more lights but again, not all circuits are functioning. The harness connector is fully seated.

I have yet to test load the PS2 sound file.

Thanks in advance for any advice!

Original Post

Replies sorted oldest to newest

Yes for a PS-3 Diesel upgrade, using the real PS-3 board with 40 pin harness and LEDs. You chose the Equivalent PS-3 sound file.  Load the flash code and sound file.  If you want to keep the original PS-2 sound file you can, but have to use the PS-3 flash code.  Any of the Premier PS-3 trainmaster flash/sound file would work.  Personally, I always load the full PS-3 file.  G

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×