Skip to main content

Can anyone tell me how to bridge a transformer? I have a Radio Shack transformer that has two 6.3 volt outputs (I measured 7.5v on each). It has 2 yellow wires and 1 black wire on the low voltage side and 2 black wires on the input voltage side.

I would like to use it as a single 14 volt transformer as opposed to a two output 7 volt transformer.






Images (1)
  • IMG_4806
Last edited by Rich Melvin
Original Post

Replies sorted oldest to newest

Add Reply

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.