I have a K-line Coca Cola Passenger car that broke the plastic coupler
does anyone know what truck i could replace this with. Iwould prefer a metal truck and coupler The trucks that are on it are three axle The car is 15 inches long
Original Post
Replies sorted oldest to newest
Not looking for stock replacement I am looking for a total Replacement that will be better than the Stock one with the plastic Coupler. Considering an MTH or Lionel Replacement. for the present time I am using a Williams Passenger Car Truck but the Coupler is a bit short but it works.
Can you show us a photo of the truck you need to replace and the measurement from the mounting pin or hole to the end of the coupler.
Camera ccd Sensor went out but I think I have a photo or Two of the Car. and I will be able to give you a measurement on the length in a bit
Thanks for the Reply
Please remember to specify a lighted psngr. truck if and when ordering a replacement.
Here is a Photo of the Passenger Car That front Truck is the One that Needs Replaced it is a Three Axle with With Power Roller the Coupler is approximately one and a half to one and Three Quarters of an inch in length. These Cars are 15" Heavyweights made By K-Line
And again The Trucks are Powered for Lights
Truck Length is 3 and 1/4" in Length 1 and 3/4" Wide By approximately 13/16" Tall
Wheel Height It is also Mounted with a Stud and a C-Clip if this information is needed
Thank you in advance for the Help
Sorry, All I have are 2 axle trucks. Dean at Brasseur Electric Trains should be able to help. They bought out all the K-line parts inventory when K-line closed down.
