Our Mikado is blinking and several have said to 'reset' it. I did the normal 'Aux O' to no avail. Another poster mentioned that there are certain codes for different engines that need to be put in after the 'AUX'.
Any idea what the code for the new Mikados would be? The manual only mentions doing the 'O' reset...
Replies sorted oldest to newest
Hi Sam I took a photo of a manual of a different legacy engine try to look in your
manual for your code it has to be in there and follow the steps in the picture I sent you. sorry the photo is turned, Alex
Sam, My Legacy Mikado is having smoke unit issues as well. I was able to reset it once with the instructions that Alex posted above. If I remember, I think the input number is 3 for an issue with a smoke unit. Unfortunately, it did not resolve the issue. Friday I took it to the local hobby shop for repair. FYI, it seems like the pick up rollers on the engine are too big. I have found that on my Mikado the pickup roller closest to the cab has shifted ever so slightly causing it to short. I wonder if this may have the caused the smoke unit to short and if there is smaller pickups that would work instead.
Access to this requires an OGR Forum Supporting Membership
