Skip to main content

Can I run my ross switches off of the 14v terminal on my Z4000?  If so I was planning on running the power to a terminal strip and connecting the switches from there.  It is 130' a loop.  I have 2 loops with a ross double crossover and 7 regular switches.  I run each loop off of one side of the Z4000.  I hope I explained it correctly.  I guess the bottom line is can I use the 14v terminal to power those switches?  Thanks.

Original Post

Replies sorted oldest to newest

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×