Skip to main content

Replies sorted oldest to newest

I have the first-run of U33Cs, while I believe the D&H model was part of the second run. Anyway, page 10 of the owners manual has a heading that covers "Lash-ups (for LEGACY operations only).

Reading that, I'm not sure you'll be able to do one in TMCC mode.

Also beware, that the gear-drive ratio was changed on these models between the first and second runs which would also make a mutli-unit consist problematic. The gear ration change improved low speed response at the expense of the top end.

Last edited by D&H 65
Originally Posted by D&H 65:

I have the first-run of U33Cs, while I believe the D&H model was part of the second run. Anyway, page 10 of the owners manual has a heading that covers "Lash-ups (for LEGACY operations only).

Reading that, I'm not sure you'll be able to do one in TMCC mode.

Also beware, that the gear-drive ratio was changed on these models between the first and second runs which would also make a mutli-unit consist problematic.

I found a procedure on page 22 of the TMCC Complete Guide to Command Control for TMCC lashups. I guess I won't know if it works on Legacy engines until I try it will I? I'll report back.

Rich

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×