Skip to main content

Lionmaster:  Yes, in 1969 Marx put a white-noise-generating card within the tender.  The sound was interrupted to sound like steam chuffs by a round revolving segmented contact underneath.  You can see the black hanger for it in the photo.  It sure sounds similar to a steam engine, and was definitely a groundbreaker at the time.

 

Thanks for your comments.  This thread is very enjoyable.

 

Here's a 736 Lionel Berkshire from somewhere between 1957-60.  I haven't been able to pin it down any closer.  

IMG_3287

Attachments

Images (1)
  • IMG_3287
Originally Posted by TrainsRMe:

       

Lionmaster:  Yes, in 1969 Marx put a white-noise-generating card within the tender.  The sound was interrupted to sound like steam chuffs by a round revolving segmented contact underneath.  You can see the black hanger for it in the photo.  It sure sounds similar to a steam engine, and was definitely a groundbreaker at the time.

 

Thanks for your comments.  This thread is very enjoyable.

 

Here's a 736 Lionel Berkshire from somewhere between 1957-60.  I haven't been able to pin it down any closer.  

IMG_3287


       

Thanks! I'm glad you enjoy it. The 736 is a classic. Looks good!
Originally Posted by lionmaster:
What are your thoughts on super o track? I have never used it.

 

I had it on my first layout. It was a 4x8 w/ 2 Super O loops. The track was my Dad's 

I remember going to madison hardwarew/ my Dad  to buy the center rail clips.  Had a hard time finding them.   The track was really cool looking, but you are limited in the curve selection & the switches can be kind of so-so. We had 2 manual ones & I believe they work ok.  The track can be expensive to get these days.  

 

Wish we would have held on to it. Would have loved it on my new PW display layout!

Originally Posted by Christopher2035:
Originally Posted by lionmaster:
What are your thoughts on super o track? I have never used it.
The track was really cool looking, but you are limited in the curve selection & the switches can be kind of so-so. We had 2 manual ones & I believe they work ok.  The track can be expensive to get these days...

It's quite a bit less expensive than FasTrack(and much quieter)  and can be custom bent to any needed radius.  The switches are somewhat the limiting factor, but there are work-arounds.

Lionmaster - Good job this is such a nice posting and the Postwar lives on!!!!  I have a small collection of Postwar but they are important to me because some of them are from my childhood years.  And, because when I run them it reminds me so much of what real toy trains are all about...  The pictures below are my consists which I make up frequently. 

 

In the event you notice, I am the Grand Master of the Crappiest Basement Society....

 

1656 Switcher building consists....

 

 

1656 Switcher

 

736 up close..

 

 

736 closeup

 

736 pulling its local run 3662 milk car, 3656 cattle car, 6411 log dump car and 2411 Flat car with steel loads.

 

 

736 local run

 

773 up close...

 

 

773 closeup

 

773 pulling its run of 3469 coal dump cars, 3456 Leigh High Valley coal cars and 6457 Maroon Caboose.

 

 

773 on Main Line

 

Poor picture but, I also run my 2026 with the 2500 series of passenger cars which you can see in the lower corner of this picture.  I am currently repainting my 2026 engine which sends out smoke in donut rings.  Love it!!

 

 

2500 cars

 

I also run the 2065, which someone earlier identified as their favorite engine.  When I decided to keep the trains up and start a real hobby with them, that was my driving engine for several years.  A real work horse....

Attachments

Images (6)
  • 1656 Switcher
  • 736 closeup
  • 736 local run
  • 773 closeup
  • 773 on Main Line
  • 2500 cars

Thanks Dave,  My basement works, it is all I have...  I wish I had done a few things before I put my table up.  On the forum and in a magazine I read about painting the ceiling and piping black, I think that would have helped a lot.  Also I have a stone foundation which draws your eyes,  But, I think I will put an 18-24" high wall up around the edge of my table to box in the layout and to add scenery images.  That should help.  I have a 20'x20' area which is plenty of room, for what I want, that is for sure.  I would just like to snazifiy the space.

Originally Posted by lionmaster:
What are your thoughts on super o track? I have never used it.

Its nice track. I don't think flexing Super O to a custom curve would be easy, if its even possible. All my ties connect to each other under the track, and rails sit in notches. Its held down by "staple" like tabs, in three areas along the rail. Its similar in looks to a K-line track. Does the K-line flex I wonder? 

 

 

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×