Skip to main content

1 reply

Smoke unit install with Blunami decoder board

JW joe woodsOGR Forum Member

I have recently sucessfully installed a Blunami 4408 decoder board into a railking NYC Dreyfus Hudson that was damaged due to hurricane damage.The train runs great,I replaced all the lights with LED's and am looking for help installing a smoke unit that can smoke with the chuffing sound. I have a Sunset smoke unit that I bought from Royz Trains that can be powered Ac or Dc. What parts would I need to make this engine smoke in sync with the chuff. Is it possible to use track power at about 14-16VAC?

Original Post
KarlDLKarlDLOGR Forum Member DIGITAL SUBSCRIBER

The Blunami cards don't have smoke chuff input or output.  You can get smoke working by putting a small magnet on a wheel (most likely tender), a reed switch next to it, and wiring that reed switch to the chuff input on the 3R/Royz smoke unit.  Roy should be able to fix you up with the parts.  But that won't accomplish perfectly synchronized smoke and sound.

There were some more in-depth comments on the chuff 'n smoke issue with Blunami on a thread within the past few months.

Add Reply

Tags: Blunami, unit, smoke, decoder
Views: 134
Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×