Woodland Scenics Just Plug Lighting ?

If I remember correctly, when I was installing the WS street lights, the instructions said I could connect two street lights to one port.

You can also use the port sharing device.  They are cheaper as well.  I use them.

https://woodlandscenics.woodla...stPlugLightingSystem

@Dave Ripp. posted:

I'm currently drilling holes under about 40 buildings to run these lights. Each hub can hold 4 lights my question is, can I splice 2 together for each port? Otherwise, I'll need a lot of hubs. Has anyone done this?

Hi Dave, I’ve had no problem joining 2-3 building lights on one port on the hub. I’m sure Woodland Scenics would disagree, but it’s working just fine. I linked most of them with the linker plugs.  It’s much easier to run a single wire to the hub than 3-4 wires. I figured if my 30+ pole lights linked together with the linker plugs works, why not try it with the buildings. Hope this helps.

Gene

@Genemed posted:

Hi Dave, I’ve had no problem joining 2-3 building lights on one port on the hub. I’m sure Woodland Scenics would disagree, but it’s working just fine. I linked most of them with the linker plugs.  It’s much easier to run a single wire to the hub than 3-4 wires. I figured if my 30+ pole lights linked together with the linker plugs works, why not try it with the buildings. Hope this helps.

Gene

Thanks Gene, that's good information and photos.