Skip to main content

I installed the AC Commander and Railsounds into my NYC Hudson (7-18005) a few years ago. I use the Cab1 / Powermaster system. Operation has suddenly become erratic. It can take several attempts to get the loco to recognize its address and to respond to the throttle. Once it is running it will abruptly stop, for no reason (track and wheels are clean as a whistle, excuse the pun). And the sound module no longer triggers any sounds other than the chuff: no bell or whistle. I have gone thru repeated re-sets on the Cab1 system and the AC commander, but cannot overcome these behaviors. Any advice out there?

Thanks,

Al

Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×