Skip to main content

Closed1 reply

Adding DCS to an Existing Legacy/TMCC layout

CaptaincogCaptaincogOGR Forum Member DIGITAL SUBSCRIBER

So I have been able to update remote and the TIU to the latest software and now would like to add it to my Legacy/TMCC system. I have been reading the DCS O Guage companion that I bought and I have several questions. I have the TIU hooked up to the Legacy using the TIU/Legacy cable and then to track in passive mode. I now have a question. I have 2 main lines that are are on separate blocks and wanted to know if I hooked the fixed voltage out on track 1 to line 1 and if I hooked fixed voltage 2 out to mainline 2 will I have any issues? The DCS is really there to run a few engines since I have mostly Legacy/TMCC engines so the Legacy, ZW w180 bricks, and SC2s run my layout.

Thank in advance.

Original Post
Barry BroskowitzBarry BroskowitzOGR Forum Member MEMORIALIZED MEMBER

Jeff,

I have 2 main lines that are are on separate blocks and wanted to know if I hooked the fixed voltage out on track 1 to line 1 and if I hooked fixed voltage 2 out to mainline 2 will I have any issues? 

As long as the two mainlines are isolated from each other as regards their center rails there should be no problems.

 

Just ensure that the TIU always has power for itself. Unless the TIU is powered separately using the Aux. Power port, you'll need to have mainline #1 powered whenever operating on mainline #2. Refer to a detailed explanation of this in The DCS O Gauge Companion 2nd Edition, pages 92-93.

 

This and a whole lot more is all in "The DCS O Gauge Companion 2nd Edition", now available for purchase as an eBook or a printed book from MTH's web store site! Click on the link below to go to MTH's web page for the book!

 
 
Views: 632
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×