Skip to main content

The wait is just about over folks! We will be debuting our Pennsy Station at this year's fall York Meet! After some major redesigning and reworking the footprint we will be showcasing... Phase I - Structure Facade, in the style of Old Pennsy Station, NY. Enjoy some behind the scenes shots of the process: 

 

DSC02604

 

DSC03193

 

DSC03196

 

DSC03200

 

DSC03218

 

DSC03219

 

DSC03220

 

DSC03221

 

Happy Tracks!

 

Traindame aka Dorcie Farkash

T W TrainWorx a Choo Chooing Division of T W Design

877-881-4997

 

Register for our TrainWorx Layout Festival today! TWX Layout Festival

Enjoy Reading my blog at www.blog.traindame.com

Attachments

Images (8)
  • DSC02604
  • DSC03193
  • DSC03196
  • DSC03200
  • DSC03218
  • DSC03219
  • DSC03220
  • DSC03221
Original Post

Replies sorted oldest to newest

Thanks for all the positive feedback!

 

Like I said...these are "behind the scenes" process shots and I'll be posting more information on a unique website that will include all Pennsy Station information! Bottom line, it's going to be even cooler than what you see here! 

 

However, Alan - I will put you down for Pennsy Station #1 and Mark - I will put you down for Pennsy Station #2

 

Here are the dimensions:

 

42 ¾” Wide, 12 ½” Deep, 17 ¼” High

 

Start making room

 

Happy Tracks!

 

Traindame aka Dorcie Farkash

T W TrainWorx

Dallas, Texas

877-881-4997

Originally Posted by RockyMountaineer:

Dorcie,

 

I think you've heard this comment before from a very well-known personality regarding another TrainWorx project recently, but it applies equally here... "It's a Masterpiece!".  

 

Please put me on the pre-orderlist, somewhere down there in the single-digit serial  numbers!!!  

 

David

Wheeeeeeee! Thank YOU David - you will be #3!

Very, very nice and appealing to those of us interested in the historical aspects of railroading, which probably includes most of us on this forum.  Sadly, this station met its demise to the wrecking ball but inspired a historical preservation movement.  If there was only one building that could be brought back, one might think this one would top the list of those interested in railroading history.

You take an electrical cord and plug it into the wall, then turn on your AC transformer hooked to all THREE rails, and your fake steam comes out of the stack and the RF sound systems makes chuffing noices, but the CLOCK IS TOO BIG!  Please someone tell me that magnificent station is NOT what this poster is posting about! Russ

Train Dame...I re-read your opening post...."Phase 1"....  Could you explain.  The reason why I ask is that in a couple of the pictures it looks like the station is wider than the 12.5" dimension you gave as in picture #1.  In pictures 2 and 3 it appears only half of the upper part of the station is present...almost as it if would go flat against a wall.  So....can you enlighten us???  Are there more Phases / additions??

 

Thanks,

#2...I mean, Alan

Originally Posted by Train Dame:

The wait is just about over folks! We will be debuting our Pennsy Station at this year's fall York Meet! After some major redesigning and reworking the footprint we will be showcasing... Phase I - Structure Facade, in the style of Old Pennsy Station, NY...... Enjoy some behind the scenes shots of the process: 

 

DSC03196

 

Here are the dimensions:

 

42 ¾” Wide, 12 ½” Deep, 17 ¼” High

Dorcie, is this the final, or close to final dimentions?
 
A quick measurement of the pre-prototype model that was displayed at York a year or so ago was about 43" X 32".
 
Is this Phase 1 just one section of the station with more sections to follow?  I remember the full display had an arched see-through dome on the roof.  I believe it was explained to me that smaller parts of the station (1/3rd, 1/2, 3/4) or the whole station could be purchased.  I'm sure that has changed in the time since it was displayed.
 
It's a magnificent model!  I'm planning on getting the whole enchilada!! 
Originally Posted by Traindiesel:

 
A quick measurement of the pre-prototype model that was displayed at York a year or so ago was about 43" X 32".
 
Is this Phase 1 just one section of the station with more sections to follow?

 

 

It wouldn't surprise me if there's more to come.  But actually, I LIKE the fact that this particular offering is only 12" deep.  And if used simply as-is, it can be placed against a painted cityscape backdrop which could provide additional depth perspective.  Sure to be an eye-catcher!

 

Love it, Dorcie.  Can't wait to see the model on display at York! 

 

David

Originally Posted by ChiloquinRuss:

You take an electrical cord and plug it into the wall, then turn on your AC transformer hooked to all THREE rails, and your fake steam comes out of the stack and the RF sound systems makes chuffing noices, but the CLOCK IS TOO BIG!  Please someone tell me that magnificent station is NOT what this poster is posting about! Russ

Excellent response Russ! I'm one of those stinkin' rivet countin' 2 railers, and it looks pretty darn good to me!

 

Simon

Originally Posted by jvega2:

 

Is this the one?

Albuquerque Depot

I haven't even seen the drawings on it yet - but it is the Albuquerque station and I believe this picture is from the 40's and the one we'll be doing is from the 50's. Basically the tower structure won't resemble the one in the picture. I am not the "station" expert but what I understand is there was damage to the tower in the 50's and in the 90's it actually burned down. 

 

I'll post pics once we start it - stay tuned forum friends .

The larger BW pic is circa 1947, the smaller pic is circa 1930, the previous color photo I believe was the original station built in the early 1900's. You can see the changes in the towers through the years getting shorter. Im sure it will be a fantastic model which ever one you decide to do. 

 

 

 

Albuquerque Depot 1947

Albuquerque Depot circa 1930

Attachments

Images (2)
  • Albuquerque Depot circa 1930
  • Albuquerque Depot 1947
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×