Skip to main content

I purchased this set after waiting over 2 years since it was ordered. The set is currently somewhere between here in Illinois and Legacy Station, so I haven't seen the set in person yet. I've seen videos on YouTube and there's one thing that concerns me.  

 

Whoever has has this engine, please answer this question. DOES THE STRIPE ON THE TENDER, LINE UP WITH THE ENGINE? Check this out when your engine and tender are setting on a shelf or a level piece of track. I sure hope I'm Seeing things. 

 

Every video I watched it's painfully obvious that the stripe on the tender is TOO HIGH when lined up with the engine. Thanks for any info. A photo would be great! 

Last edited by N&W 1218
Original Post

Replies sorted oldest to newest

Looks like all you guys who've complained about Lionel's 18" passenger car  "windows" now have something else to focus on.  

 

FWIW, this has been "mismatched" for quite some time now.  It was like this on the TMCC version of 611J.  And not surprisingly also on the Legacy 612J, which was produced at the same time as the Legacy 611J that's packaged in the Pocahontas Set.

 

Can't say it ever really bothered me... But then neither did "the windows".  

 

David

N&W 1218,

             Nice youtube channel you've earned your 101st subscriber, keep up the good work! How's Legacy Station's prices? I live up in Mass so Charles Ro is the major train store. I also dealt with Gyrzyboski last week and bought some more diesel engines.

 

As for the Pocohantes, I don't have the set, but it's one of my favorites along with the ESE and Commodore Vanderbilt!

6e8439a7e92e54f9d20b9ef3c3f946a56688bfcd-1_20130719-122214-C1-Trainz-3560746-05

6f0f7f9a11e5debeb665b14cc3708f514fdbdb5d-t61_002

Attachments

Images (2)
  • 6e8439a7e92e54f9d20b9ef3c3f946a56688bfcd-1_20130719-122214-C1-Trainz-3560746-05
  • 6f0f7f9a11e5debeb665b14cc3708f514fdbdb5d-t61_002
Last edited by Dan's Trains

Brian has treated me very well! I ordered this set when it first came out and prepaid 10% down. A year later I got tired of waiting and cancelled my order. Brian refunded my deposit. He also promised to call me when he got the set to check and see if I still might want it. I got a call 2 weeks ago. I declined. After watching the videos on YouTube and hearing the sounds, I called him Tuesday and he shipped it right out. He could have sold the set to me for a higher price but he held to the prepay amount. I'm very happy! Sure glad I didn't see the high stripe before I bought it. Can't say what I would have done. I own 2 606 engines w/ tenders. If it will work, I may swap one of the shells. 

Here is my 606. Not bad, but, a little off.

 

DSCF0327

 

Along with the plan (previous post) showing how the top of the cab should be higher than the top of the tender, judging by the line of the bottom of the cab compared to the stoker motor, it looks like the rear of the cab is too low and could use some raising.

 

DSCF0328

J Fm's Side

 

Any mis-match is harder to see from this angle. Note the correct roll-top tender for the 606. ( Bug-eye class lights waiting to be replaced)   

 

DSCF0329

 

Attachments

Images (4)
  • DSCF0327
  • DSCF0328
  • J Fm's Side
  • DSCF0329
Last edited by Big Jim

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×