Can Refueling Sequence be activated on iCab?

With the CAB-2, you activate the Refueling Sequence by pressing AUX1, then pressing and holding "0" for several seconds. Doing the same thing on the ENG screen of the iCab app, all I get is a horn blow. Am I doing something wrong, or is the Refueling Sequence unavailable on the iCab app? (Current Fuel Level is readily activated on the iCab app via a dedicated button on the dialogue screen.)

By the way, my iCab app is v2.0x32.

Retired is a misnomer.  Should be detired--less tired, more fun!

Original Post

I wasn't doing something wrong. Evidently, the Refueling Sequence is a functionality that has not been implemented in the iCab app. My guess--which is just that, a guess--is that this was an oversight. I hope that Lionel will address this omission in the next update.

I also hope that Lionel will increase the functionality of the two smoke buttons so that they replicate the Legacy feature of being able to set the smoke to Off, Low, Medium, or High. It seems that now, the two buttons just turn the smoke on and off. I think that being able to adjust the smoke level is an important feature. Of course, I'm not the one who would be doing the programming, but my uninformed opinion is that it wouldn't be difficult to do this. In the meantime, when the smoke is turned on via the iCab app, what level is it at: Low, Medium, or High?

Retired is a misnomer.  Should be detired--less tired, more fun!

Add Reply

Likes (0)
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×