DCS Explorer Firmware Update 1.2 Available

A DCS Explorer Firmware Update 1.2 is available here.

This update corrects a few rarely encountered error when using the DCS Explorer. Read the accompanying information for details.

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

Original Post

Bruce,

Although I've not opened one up to see what's actually inside, yes, it is essentially a WIU/one TIU channel  combination.

However, it's only useable via a DCS App. The DCS Remote cannot access a DCS Explorer.

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

Is anyone having trouble downloading the firmware update 1.2 for the explorer? I couldn't do it. I follow the steps in the manual and it wouldn't do it. I don't know what I'm doing wrong. I'm not the best when it comes to computers, and right now I'm lost with this update. I like to hear if anyone else is having problems with it.

I couldn't do it. I follow the steps in the manual and it wouldn't do it. I don't know what I'm doing wrong.

The only way anyone can help you is if you state exactly what you do and exactly what happens.

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

When you selected Choose File, did a file dialog box appear? If so, you then need to navigate to the update file and select it.

Further, make sure that if the update file arrived on your computer as a Zip archive, that you unzip it before you access LuCI.


DCS Book Cover

This and a whole lot more about DCS WiFi is all in MTH’s “The DCS WiFi Companion 2nd Edition!"

This book is available from many fine OGR advertisers and forum sponsors, or as an eBook or a printed book at MTH's web store!

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

When I select the choose file, it shows no new firmware filename to click open.

Click on Choose File. Then, take a picture of the screen and attach it to a post.

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

here is the picture that I'm getting, it doesn't say choose file. It showed nothing in the box.

That's not what I asked you to do. I said to take a picture of the screen,the entire screen, not some small part of it that happens to be the wrong part.

I used my I pad and I was able to see the choose file in the box, I selected it and nothing was shown. There was no new firmware filename to choose from.

Do you understand that you must first download the update file from MTH's Protosound2.com web site?

Did you download it to your iPad and do you know where you put it? Unless you understand how your smart device does things you should update the firmware using a PC. Regardless, before updating the firmware you must download the firmware to the device that will be doing the update.

Barry

 

DCS Ambassador & author of The DCS Companion series of books

Train-Ca-Teers - All For O and O For All!

 

Add Reply

Likes (2)
Alan MancusMartyE
The DCS Forum is sponsored by


OGR Publishing, Inc. PO Box 218, Hilliard, OH 43026 330-757-3020
www.ogaugerr.com
×
×
×
×
×