Engine automatically goes into reverse when stopped

Delete any MU, Reprogram them and try again.  Change batteries in your Remote?

I deleted the MU and reprogramed the engines and used the generic mem module to get the info this time. No luck it runs like it is in conventional except I can control the speed with the remote. it starts up, I get all the bells and whistles, I run it in forward and then stop the engine changes direction automaticly, if i run it in reverse and slow to stop it changes  to forward,  I have checked the first 3 engines that I upgraded almost a year ago and they still run fine.

 I reprogammed the engines went through all the procedures The engines run and sound ok and I think I have found the problem, I noticed all my engines even the lionel legacy rs11 with TMCC from the factory  will change direction if I scroll the throtlle past the stop point. What I mean is when I rotate the throttle one or more turns  after the bar graph reaches 0  It changes the direction of the engine. I have never noticed this before.   is this normal?

old_toymaker posted:

 I reprogammed the engines went through all the procedures The engines run and sound ok and I think I have found the problem, I noticed all my engines even the lionel legacy rs11 with TMCC from the factory  will change direction if I scroll the throtlle past the stop point. What I mean is when I rotate the throttle one or more turns  after the bar graph reaches 0  It changes the direction of the engine. I have never noticed this before.   is this normal?

 

yes.