![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928262/fodoid/38737271367928212/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928263/fodoid/38737271367928223/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928264/fodoid/38737271367928230/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928265/fodoid/38737271367928231/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928266/fodoid/38737271367928232/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928267/fodoid/38737271367928233/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928268/fodoid/38737271367928234/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928269/fodoid/38737271367928235/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928270/fodoid/38737271367928236/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928271/fodoid/38737271367928237/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928272/fodoid/38737271367928238/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928273/fodoid/38737271367928239/imageType/MEDIUM/inlineImage/true/image.jpg)
![image image](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/38737271367928083/filePointer/38737271367928274/fodoid/38737271367928240/imageType/MEDIUM/inlineImage/true/image.jpg)
![]() ![]() ![]()
![]() ![]() ![]()
![]() ![]() ![]()
![]() ![]() ![]()
|
Replies sorted oldest to newest
Great looking loads Eric. Who made the AC dozer? I'm looking for a 50's era one to move coal around a power plant I'm building.
Ed Rappe
Eric, Great work and the loads are fantastic! Malcolm
The loads look great. The only down side is that die cast construction vehicles really push the weight way up on the flat cars.
I usually ignore this stuff. Glad I looked - I love those tractors. Did you say where they came from? I am an absolute road grader freak! I could go for these things. And the flat cars themselves look pretty darn good too - hopefully not plastic?
Very nice loads.
Very nicely done.
Eric - As usual, very nicely done.
Art
Excellent!
Terrific work Erik.
what did you use for the cable tie downs? I usually use a thin braided metal line that looks like it's galvanized. Yours is much darker.
Very inspirational Eric thanks for posting.....
IMO, Scrapper blade would have been down, on the deck of the flat car, as well as the front gate. Ejector pan in the fill mode, not forward. Rarely would they be allowed to set overnight as pictured, in the up position, definitely not shipped that way. Scrapper blade was always kept near the ground, best stability of a somewhat tip-sy machine. The scrapper blade was a better brake than what most of the machines had.
There is a wild story about the Montour Railroad, and a run-a-way flat with an earth mover on it, that eventually stopped, when it hit the front of the #76 SW9 unit.
Wonderful modeling
Thanks for posting. In the mid-70's I worked with a couple of very old Terrex pans like the AC pan pictured. Not a human friendly piece of equipment.
Great research Erik Thanks you.
#76 was rebuilt and used again. Though engineers preferred to use it in a consist, said it never tracked right after the crash.
#76 was rebuilt and used again. Though engineers preferred to use it in a consist, said it never tracked right after the crash.
I love it Erik. No doubt, coming out of WWII, we were learning a lot. Everything was getting larger, leaps and bound larger. It would have taken time for all to comprehend the intensity of larger, bigger, more powerful, etc. Same applied to the Agriculture industry and their equipment. You're modeling in very accurate, thank you.
Recent trips on the PA turnpike, I-76, All this type of equipment is gone. The huge excavator seems to be the machine of choice. Some large quarry trucks. Most large earth movement areas, the excavators cut a solid road bed for the quarry trucks. Safety a big concern. Here in Western PA the massive project with the PA turnpike I-76 seem to be straighten all the curves. We have also removed (3) of the seven tunnels. Things change in 70 years. IMO Mike CT
As I review the pictures, one of the big changes was that a lot of earth moving equipment like this, early, operated by winch and cable lift systems, eventually replaced with hydraulic lifts. Even early D7 and D8 Cat Dozers used cable lift for the blades. The high tree, to the front of a couple of the tractor-less pan pictures, most likely was for cable lift. It would have made sense to ship the pan in the up position, it could have been attached to any tractor to be removed from the flat. Installing the multiple cable system with the winch, usually on the tractor, would have required a lot of effort, most likely done at the excavation site. Hydraulics changed a lot of the industry.
Best wishes, Erik
Mike CT
Some nice work!
I have a Red Caboose ATSF flat in need of a load... Great ideas here.
Close to the edge, round by the corner.....
Access to this requires an OGR Forum Supporting Membership