What do you folks think of Tru Color paints? All the ads about it say solvent based. Anybody have any luck with it?
I think that the jury is still out.
Some one sent me a copy of the MSD on their thinner and as I recall it was rather similar to the components of Dio-Sol although I don't recall whether the proportions were close or not.
I've had good luck with Tru-Color paints and it's predecessor, Accu-Paint. The two are close if not identical.
Dries smooth, quickly and can be masked within a half hour. Leaves a good, semi-gloss surface that can be decalled on. Floquil and Dullcoat can be sprayed over it with no issues.
But there is a learning curve, it requires a slightly different technique as by my observation doesn't come out in as wide a spray pattern as Floquil, more air pressure and the lighter colors will require a gray primer or more coats than Floquil.
Rusty
Rusty, Thanks as that's what I wanted to hear...Sprays about like the old Accu-Paint 
Micro-Mark is working on it, and shortly (by early Fall 2013) we'll have a superior-quality water-based ready-to-spray acrylic in at least the more-popular generic colors, such as Rail Brown, Grimy Black, Aged Concrete, Clear Flat, etc.