Hello everyone. I need a schematic if one is out there. My ROW 384 watt transformer was damage in our house move from California, the first channel is not giving any out put the second one does. there was a Circuit breaker damaged which I replaced however the first channel still is not working. My friend who is an electrician asked for a schematic of it, o boy where do I get one of those, tried google but no luck.
Replies sorted oldest to newest
John, has your friend opened it up? I had one of these and recall they pretty basic units.
Pete
John, contact forum member Lou N. He designed it and can help you.
Thank you Pete and Marty, I will give him a call.
Norton posted:John, has your friend opened it up? I had one of these and recall they pretty basic units.
Pete
Yes we open her up and checked the wiring, all is tight but no AC output on the first channel.
I sent a message just now To Lou N.
Again thanks guys
Lou is a fantastic guy and he will help you.
hi if you can get it fixed I would be glad to help you I repaired down to component level replacement and will repair it for you!
Alan just send me an email ok
Hello Everyone, Lou N sent me the schematic, my friend will look it over and see what up. I want to thank Lou N for sending the file. Lou is a great guy.
THANK YOU LOU !
repair technician posted:hi if you can get it fixed I would be glad to help you I repaired down to component level replacement and will repair it for you!
Alan just send me an email ok
I will email you if we cannot fire the transformer up. I really like it. the guys at AGHR referred to it as the train Arc Welder. 
Success the ROW transformer, the culprit was the Horn/bell button assembly. I am trying to get a new one, we bypassed it for the time being and everything is going great.
Thanks everyone and have a great Thanksgiving!
Access to this requires an OGR Forum Supporting Membership
