Skip to main content

Closed2 replies

How do I create and wire up an insulated Atlas track

Replies sorted oldest to newest

Steve HorvathSteve HorvathOGR Forum Member DIGITAL SUBSCRIBER

 

You can use Atlas Insulated Rail Joiners item # 6093. To create an insulated rail section you will need 2 insulated rail joiners as shown on the attached drawing. Replace the standard Nickel Silver rail joiners at the ends as shown. Then attach a wire to any of the Nickel Silver rail joiners inside the area between the 2 Insulated joiners as shown. This wire will provide detection required to set the flasher in operation.

Atlas Insulated Rail 2

Attachments

Hide
Images (1)
  • Creating an insulated rail section using Atlas track
Views: 709
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×