Skip to main content

July 15th, 2021 – Lionel Purchase of MTH Tooling

Lionel L.L.C is excited to announce the purchase of a broad assortment of M.T.H Electric Trains tooling.  The tools, which were carefully reviewed and evaluated by the Lionel Product Management Team, are a range of items MTH has offered throughout their years in the model train industry.



“The tools we selected to purchase will be a nice complement to our current and future product lines,” Lionel Chief Executive Officer Howard Hitchcock said. “We are looking forward to offering our consumers a version of these products that will leverage Lionel’s operating (or control) systems, advanced electronics and stable of licensed IP.”



The first release of products leveraging the newly acquired tooling will be seen in the release of Lionel Trains 2021 Signature Two cataloging on July 16th.

Original Post

Replies sorted oldest to newest

I wanted to give some additional info on this announcement.  Lionel requested that this announcement be made on our forum at a time they set.  There was an earlier version of this placed on the forum by one of our highly respected forum members but it was taken down so that we complied with Lionel's request.  This will be featured in all of the categories so please do not start additional threads on this topic.  We will leave this thread open for your comments.

Thanks!

Alan

@MartyE posted:

While it's exciting, hardly a game changer.  They added tooling.  I'm excited to see it but the build up was unnecessary.

Lionel purchasing a “broad assortment” of tooling from its toughest competitor is very big news. I’m sure we have just seen the beginning of just how important of a step this is. I’m sure not all of the newly purchased MTH tooling will be in tomorrow’s catalog and even more will be available in upcoming catalogs.

Lionel purchasing a “broad assortment” of tooling from its toughest competitor is very big news. I’m sure we have just seen the beginning of just how important of a step this is. I’m sure not all of the newly purchased MTH tooling will be in tomorrow’s catalog and even more will be available in upcoming catalogs.

Again not living up to the hype.  It was pretty obvious that Lionel would end up with some tooling.  I'm glad they got some tooling and we'll see new engines with Legacy but again anticlimactic.

As I noted in the 2021 V2 discussion there really is nothing "revolutionary" about Lionel acquiring some MTH tooling. All that will happen is items that have already been produced will come in a different color box with different electronics inside, nothing more, nothing less. If you are a hobbyist like me who has no brand/control system loyalty and just buys models of the prototypes you like, regardless of manufacture/control system, then it's the same stuff I could buy before. Nothing new to see here.

What would be revolutionary is Lionel ditching TMCC/Legacy/Lionchief and adopting the model railroading standard of DCC, or even creating a new control system. A locomotive with a different board, put inside a different color box, is not that.

If Lionel got a bunch of steam engines and puts whistle steam and Legacy in them, that's nice.  I hope they don't override the individualized sound files of MTH with the uniform voice actor at Lionel.  (He does a nice job but it's a bit depressing that every Lionel engine has the very same voice.)

...Is anyone going to announce what, exactly, Lionel bought from MTH?  If there's a KBayStsB in blue with Legacy and whistle steam (and German sound files), I will be excited.

Until we see some specifics, I'm not sure what the big deal is.  It was predictable that the tooling would eventually land somewhere.

While I've tended to buy more MTH items than Lionel (price, and too deep into DCS), the range of MTH models seems to have stagnated in recent years.  How many more of the same models in different paint schemes can the market absorb?  IMO, what is needed is some new tooling for different models.

@BC1989 posted:

If Lionel got a bunch of steam engines and puts whistle steam and Legacy in them, that's nice.  I hope they don't override the individualized sound files of MTH with the uniform voice actor at Lionel.  (He does a nice job but it's a bit depressing that every Lionel engine has the very same voice.)

...Is anyone going to announce what, exactly, Lionel bought from MTH?  If there's a KBayStsB in blue with Legacy and whistle steam (and German sound files), I will be excited.

Whaaaaa??…..Lionel isn’t going to use the first bit of MTH electronics ……AFAIK, the only announcements were for tooling only,….not electronics,…..Lionel won’t be using the first piece of MTH wire,…why would they when they have their own system!…

Pat

@Lou1985 posted:

As I noted in the 2021 V2 discussion there really is nothing "revolutionary" about Lionel acquiring some MTH tooling. All that will happen is items that have already been produced will come in a different color box with different electronics inside, nothing more, nothing less. If you are a hobbyist like me who has no brand/control system loyalty and just buys models of the prototypes you like, regardless of manufacture/control system, then it's the same stuff I could buy before. Nothing new to see here.

What would be revolutionary is Lionel ditching TMCC/Legacy/Lionchief and adopting the model railroading standard of DCC, or even creating a new control system. A locomotive with a different board, put inside a different color box, is not that.

Lionel announcing it is ditching Legacy and TMCC for DCS, wouldn’t be revolutionary, it would be business suicide. This announcement was big enough that OGR made it know that a significant announcement was coming.

What a ride! 

40 years ago Mike Wolf was portrayed as 'David' in taking on Lionel (Goliath).  Even had "Lionel" within the decoration above the family's fireplace, as I recall. 

Protected his interests in the courtroom.

Made Union Pacific blink on behalf of the entire spectrum of our hobby's manufacturers.

Always kept his station at the helm...to well-deserved retirement.

Today's announcement is the best punctuation Mike Wolf and his MTH team could have ever had to his legacy.   (Oops, pun intended!?)   

Was he a "worthy opponent"?.....Just ask Lionel. 

applause

KD

Happy_Happy_Joy_Joy

Attachments

Images (2)
  • applause
  • Happy_Happy_Joy_Joy
@dkdkrd posted:

What a ride!

40 years ago Mike Wolf was portrayed as 'David' in taking on Lionel (Goliath).  Even had "Lionel" within the decoration above the family's fireplace, as I recall.

Protected his interests in the courtroom.

Made Union Pacific blink on behalf of the entire spectrum of our hobby's manufacturers.

Always kept his station at the helm...to well-deserved retirement.

Today's announcement is the best punctuation Mike Wolf and his MTH team could have ever had to his legacy.   (Oops, pun intended!?)   

Was he a "worthy opponent"?.....Just ask Lionel.

applause

KD

Happy_Happy_Joy_Joy

I think you have a good sense of this. This is, as you have said, the punctuation mark, the end of the Lionel vs MTH story. Yes, there is still a company called MTH around for the time being and DCS is supposed to be supported for a while longer but the old days are over.

This is great news. Perhaps we could get some new locos. The GP60/GP60M/GP60B, FP45/F45s, SD7/9, and others are engines I would totally buy. Perhaps Lionel will finally get their old Standard Gauge and O Gauge prewar tinplate tooling back and remake those old classics again. MTH Railking loco models with Legacy would be fantastic. Legacy guys like myself would be able to run big engines on smaller curves.

@harmonyards posted:

If you’ve never experienced sticker shock before, ….you’re fixin to!..

Pat

I am sure you are correct. I am guarding that this catalog or next will have the effects of inflation. However, with Menards now in the game with at least starter engines and atlas upping its game, I don’t think they have a ton of room to go super crazy. However, I am often hopelessly optimistic ( side effect of being an Orioles fan).

@Csxcellent posted:

I am sure you are correct. I am guarding that this catalog or next will have the effects of inflation. However, with Menards now in the game with at least starter engines and atlas upping its game, I don’t think they have a ton of room to go super crazy. However, I am often hopelessly optimistic ( side effect of being an Orioles fan).

You're in for quite a shock. Wait till tomorrow .

I’m fairly new. I missed the downfall of Marx, k-line, weavers and Williams. When a new company takes over tooling (I am assuming Lionel will be using their manufacturer). Are there usually issues because of manufacturing inconsistencies? Like, if I buy thousands of dollars worth of Strasburg coaches, are there likely to be bugs. Kind of like for the same reasons you don’t buy a car in its first model year.

The O-gauge train hobby market expanded for a while to a marketplace with too many players; now it is shrinking -- more or less to "the last man standing," Lionel. I'm a Lionel loyalist, so this announcement is good news to me and to my extended family. They will inherit my collection of Lionel trains some day (but not too soon, I hope)!

Mike Mottler    LCCA 12394

Wow, this is great news, I’m proud of Lionel taking a Leap of Faith with some of the MTH line of products, tooling, and this will sound far fetched, offer Legacy and down the road make one system run both. Let Legacy and DCS work together. That’s just an idea, and I believe some of the electronic wizards at Lionel or MTH could pull this off. This is good to know. Happy Railroading Everyone, now, back to the Menards saga.  

The O-gauge train hobby market expanded for a while to a marketplace with too many players; now it is shrinking -- more or less to "the last man standing," Lionel. I'm a Lionel loyalist, so this announcement is good news to me and to my extended family. They will inherit my collection of Lionel trains some day (but not too soon, I hope)!

Mike Mottler    LCCA 12394



@HiramO posted:

I for one find this quite exciting. As a TMCC operating person, I have noted many, many MTH locos that I envied. If Lionel plays this right it will cost me a lot of money...

Jan

Buying a piece of MTH will be a great investment for Lionel

The O-gauge train hobby market expanded for a while to a marketplace with too many players; now it is shrinking -- more or less to "the last man standing," Lionel. I'm a Lionel loyalist, so this announcement is good news to me and to my extended family. They will inherit my collection of Lionel trains some day (but not too soon, I hope)!

Mike Mottler    LCCA 12394

It has been an interesting evolution. Now there is  a large Lionel and a group of much smaller O gauge companies.

@Rail Dude posted:


Competition is good for business and the hobby is seeing that competition fade.

Dude,

That 'fade' began almost 20 years ago now.  We're fortunate to see Menard's come in and take a shot a turning it around after too many sources have left, scaled back, or fallen apart.

On the other hand the only real way to get the same level of competition back that we had before the fade began is to recruit more interested hobbyists in order to re-expand the market.  It looks like Lionel is hoping to do so with this purchase, although it may be more a case of trying to stop the continued shrink.

Are we doing everything we can to help make a re-expansion happen?

Mike

@superwarp1 posted:

Does Lionel get access to MTH factories?  That’s the real game changer if so, as Lionel’s current Chinese factory suck.

superwarp,

How do you know it's the factory that sucks?  Quality takes a lot of work.  With the exception of those in Japan from the 50's through the 80's (all largely having a built-in cultural commitment to perfection), most factories only produce junk if their customers agree to accept junk.

There's enough blame here to spread around to all parties in the design-procurement-manufacturing chain.

Mike

@Rail Dude posted:

I agree completely. At least now our Lionel control system will be installed in a locomotive that arrives with the correct paint scheme and without pieces lying loose in the box.

But at what price?

Competition is good for business and the hobby is seeing that competition fade.

Huh? Do you think Lionel would subcontract the locomotives out to MTH? I'm guessing they acquired the Santa Fe Blue Goose tooling, unfortunately their 4-8-4 was painted much more in the Girls Train color pallette then close to actual Blue Goose colors. Superman and Batman are fantasy items yet they refrain from pint tights and yellow or green capes right? In any case it will be an interesting catalog update. Clearly MTH realized selling tooling at some price is worth more then scrapping it.

@BobbyD posted:

Huh? Do you think Lionel would subcontract the locomotives out to MTH? I'm guessing they acquired the Santa Fe Blue Goose tooling, unfortunately their 4-8-4 was painted much more in the Girls Train color pallette then close to actual Blue Goose colors. Superman and Batman are fantasy items yet they refrain from pint tights and yellow or green capes right? In any case it will be an interesting catalog update. Clearly MTH realized selling tooling at some price is worth more then scrapping it.

I have no idea what you just said...

Dude,

That 'fade' began almost 20 years ago now.  We're fortunate to see Menard's come in and take a shot a turning it around after too many sources have left, scaled back, or fallen apart.

On the other hand the only real way to get the same level of competition back that we had before the fade began is to recruit more interested hobbyists in order to re-expand the market.  It looks like Lionel is hoping to do so with this purchase, although it may be more a case of trying to stop the continued shrink.

Are we doing everything we can to help make a re-expansion happen?

Mike

Mike, I love what Menards is doing and definitely a boost for the hobby.

Are we doing enough? I can only hope so.

As a diehard MTH engine fan, this news is not only not welcomed but horrible.  I hate to be Debbie Downer but if these are Railking steam engines that will only be available with Legacy, as they say on Shark Tank, "I'm out".   Without DCS, forget it.  Premier steam engines mostly require curves over 0-42 so Railking has been my go to.  I'll be interested to find out if there are any Railking steamers left for what's left of MTH to make.   If not, I guess it's EBay relics or nothing.  I hope Atlas makes a strong and long run with what they have purchased in order to keep DCS alive with their diesels.  And will MTH continue to make Premier steamers?  Or are those going to be sold off, too?

This is great news.

Maybe now Lionel can finally get around to producing an Amtrak Genesis P42 instead of that nonsense they did a few years ago with the release of an Amtrak RTR set...

But then again (for those in the now, gladly correct me if I'm wrong), didn't Lionel inherit all of the K-Line tooling and instead of producing the K-Line product - some of which was better quality product (trains and operating accessories) than Lionel - just shuttered those items away into history... and high prices on auction sites when they show up.

Last edited by Amfleet25124
@IRON HORSE posted:

As a diehard MTH engine fan, this news is not only not welcomed but horrible.  I hate to be Debbie Downer but if these are Railking steam engines that will only be available with Legacy, as they say on Shark Tank, "I'm out".   Without DCS, forget it.  Premier steam engines mostly require curves over 0-42 so Railking has been my go to.  I'll be interested to find out if there are any Railking steamers left for what's left of MTH to make.   If not, I guess it's EBay relics or nothing.  I hope Atlas makes a strong and long run with what they have purchased in order to keep DCS alive with their diesels.  And will MTH continue to make Premier steamers?  Or are those going to be sold off, too?

If Lionel bought an RK steam locomotive tooling the likely route is they would end up in the Lionchief line, not Legacy.

superwarp,

How do you know it's the factory that sucks?  Quality takes a lot of work.  With the exception of those in Japan from the 50's through the 80's (all largely having a built-in cultural commitment to perfection), most factories only produce junk if their customers agree to accept junk.

There's enough blame here to spread around to all parties in the design-procurement-manufacturing chain.

Mike

Well, the defects are coming from somewhere.



But then again (for those in the now, gladly correct me if I'm wrong), didn't Lionel inherit all of the K-Line tooling and instead of producing the K-Line product - some of which was better quality product (trains and operating accessories) than Lionel, just shuttered those items away into history... and high prices on auction sites when they show up.

Some things from K-Line were used.  I think the newer PRR K4s use some of the tooling.  The original Lionel K4s from the late 90s early aughts had a firebox that was too long.  I think maybe the moguls, ten wheelers, or 4-6-4T (can’t remember which) uses a K-Line derived drive train.  

That said, I agree… I would hate to see some of MTH’s great steam (Decapods, Q2, L-3 Mohawk, WM M-2 Challenger, Erie Triplex, GN Z-6 and R-2 etc.) just go on the shelf and not get used.  Or be so expensive that It’s out of reach.  

This is great news.

Maybe now Lionel can finally get around to producing an Amtrak Genesis P42 instead of that nonsense they did a few years ago with the release of an Amtrak RTR set...

But then again (for those in the now, gladly correct me if I'm wrong), didn't Lionel inherit all of the K-Line tooling and instead of producing the K-Line product - some of which was better quality product (trains and operating accessories) than Lionel, just shuttered those items away into history... and high prices on auction sites when they show up.

Lionel briefly made a few K-Line 21" passenger cars, Milwaukee RD, Texas Special among others. The USRA Mikado, Pacific, 0-8-0, PRR B6 and A5 maybe the K4 are all K-Line tooling. They also own a lot of the Weaver tooling. Pretty sure their made in the USA cars are ex Weaver plus the 60' head end cars.

Pete

@rplst8 posted:

Some things from K-Line were used.  I think the newer PRR K4s use some of the tooling.  The original Lionel K4s from the late 90s early aughts had a firebox that was too long.  I think maybe the moguls, ten wheelers, or 4-6-4T (can’t remember which) uses a K-Line derived drive train.  

That said, I agree… I would hate to see some of MTH’s great steam (Decapods, Q2, L-3 Mohawk, WM M-2 Challenger, Erie Triplex, GN Z-6 and R-2 etc.) just go on the shelf and not get used.  Or be so expensive that It’s out of reach.  

@Norton posted:

Lionel briefly made a few K-Line 21" passenger cars, Milwaukee RD, Texas Special among others. The USRA Mikado, Pacific, 0-8-0, PRR B6 and A5 maybe the K4 are all K-Line tooling. They also own a lot of the Weaver tooling. Pretty sure their made in the USA cars are ex Weaver plus the 60' head end cars.

Pete

On my personal preference list would be for Lionel to produce the 21-inch Bombardier Commuter Coaches that K-Line did that aren't as stubby looking as the 19-inch ones that MTH did, but I digress

I’m not sure that I agree with this announcement meaning a reduction in competition. My head has been in a different place the last few months so I’m a little fuzzy on details, but if I remember the bits I’ve gleaned from various threads, there are a number of pieces to this puzzle...

  1. I believe MTH said that there would be an “MTH entity” which would handle maintenance and development of DCS (I thought that included the Z4000 - not sure)
  2. there was to be another “MTH entity” which would still produce certain MTH engines/rolling stock
  3. Atlas purchased some MTH tooling that they will produce - the engines will have DCS
  4. and now, Lionel has purchased some MTH tooling that they will produce - the engines will have Legacy/TMCC


So, assuming I am remembering all this correctly, while there won’t be one major competitor (aka MTH), there will be a several pieces which may be greater than the sum of the pieces.

P.S. and I hope Lionel got the tooling for the CP Royal Hudson and the produce one in the short term!!!

Last edited by Apples55

Maybe the catalog will have a list of what tooling was purchased from MTH. As much as I like the anticipation and wondering of what will be in the catalog, I would like to know if Lionel even has the tooling for something before we start speculating when they will make the thing. It does no one any good to think "they will catalog L3/L4 Mohawks with Legacy this time around" only to find out years later that they don't have that tooling. Did I just reveal what I want most out of this???

Last edited by Harry's Trains

If this news makes anyone happy, I'm glad for them and good luck. Not meaning to rain on anyone's parade, just giving my two cents...

Personally, it means nothing to me.

People looking for USA-made craftsmanship, quality and competition...we have a place for you at our prewar table.

IMG_1780

I don't see the excitement...my prewar switchers are all 79 to 82 years old...they can all easily make it for another 79 to 82 years. The new stuff will last how many years and will the new products be supported as far as out-of-warranty repairs? Weren't there topics about this? Lionel Support: Out of Warranty Repairs not being taken at this time | O Gauge Railroading On Line Forum (ogaugerr.com)

Tom

Attachments

Images (1)
  • IMG_1780

Maybe the catalog will have a list of what tooling was purchased from MTH. As much as I like the anticipation and wondering of what will be in the catalog, I would like to know if Lionel even has the tooling for something before we start speculating when they will make the thing. It does no one any good to think "they will catalog L3/L4 Mohawks with Legacy this time around" only to find out years later that they don't have that tooling. Did I just reveal what I want most out of this???



After this week, Lionel never mentions MTH again.

In the presentation today, they rarely if at all identified what was MTH.

5AB444CC-02FD-4B61-B701-5763C3330968

Attachments

Images (1)
  • 5AB444CC-02FD-4B61-B701-5763C3330968
Last edited by SeptaTony
@Paul Kallus posted:

This was a no-brainer for Lionel, just a matter of making the numbers work for both parties. MTH simply had a tremendous amount of fine-scale tooling for steam and electrics...probably diesels too but am not well-versed in those. The Railking Line of buildings may not be gone, either, another tremendous resource for Lionel

Why can I see menards making railking buildings?

So... does this mean Lionel won?

Actually, I'm not a brand loyalist. In fact, I think it's sad that MTH has been (still being) parted out. Over the decades I had a few of MTH's products, and I thought them good. I also admired the spunk that Mike would exhibit at times. MTH was definitely an interesting company.

However, as my dad would sometimes say when it was time for me to stop the playing and hit the sack: "All good things must come to an end!"

So long MTH.

Andre

@laming posted:

So... does this mean Lionel won?

In one sense, I guess the answer would be yes.  However, Mike leaves at or near the top of his game.

Actually, I'm not a brand loyalist. In fact, I think it's sad that MTH has been (still being) parted out. Over the decades I had a few of MTH's products, and I thought them good. I also admired the spunk that Mike would exhibit at times. MTH was definitely an interesting company.

One thing I wonder though... How many hobby store custom run Pacific's and RS1's can "new" MTH do before the market burns out on them.

Rusty

However, as my dad would sometimes say when it was time for me to stop the playing and hit the sack: "All good things must come to an end!"

So long MTH.

Andre

@Traindiesel posted:

Exactly. What’s the big secret?

Is it possible that MTH still might be using some of the tooling and in doing so would lose sales if Lionel announced all of the tooling bought?  Just a thought.  I'm with you though other than if it's a contractual thing then spill all the beans.  The whole "Big Announcement" thing here was a to do about nothing IMO.

@MartyE posted:

Is it possible that MTH still might be using some of the tooling and in doing so would lose sales if Lionel announced all of the tooling bought?  Just a thought.  I'm with you though other than if it's a contractual thing then spill all the beans.  The whole "Big Announcement" thing here was a to do about nothing IMO.

During the LCCA presentation yesterday, Lionel stated that they had an opportunity to purchase any or all of the MTH tooling. Lionel spend sometime assessing the tooling and purchased, as they stated, a broad assortment of tooling. Whatever tooling MTH still have in their possession it is because no one else ( Lionel and Atlas) wanted it, not because MTH wanted to keep it.

Lionel also stated that not all of the tooling they have will be in today’s catalog. Okay he implication being that future catalogs will have other MTH products. This is a big deal.

During the LCCA presentation yesterday, Lionel stated that they had an opportunity to purchase any or all of the MTH tooling. Lionel spend sometime assessing the tooling and purchased, as they stated, a broad assortment of tooling. Whatever tooling MTH still have in their possession it is because no one else ( Lionel and Atlas) wanted it, not because MTH wanted to keep it.

Lionel also stated that not all of the tooling they have will be in today’s catalog. Okay he implication being that future catalogs will have other MTH products. This is a big deal.

Still not buying it's a big deal.  It's good that the tooling is getting a second life but the whole "Game Changer" for the hobby was wildly overstated.

I'll take the middle road:  it's a game changer to some of us.  Because of economics or just a love of simplicity, many chose an operating system and stuck with it.  That's why I'm still running TMCC 1 after all these years.  LionChief Plus gave me the opportunity to run the kinds of trains I like without investing in a new OS, so I adopted that too.

But that doesn't mean I didn't long for some of the traditionally-sized equipment in the M-T-H catalogs.  I just wasn't going to invest in DCS.

Now I can enjoy that equipment, and run trains my way.

Jon

@MartyE posted:

Still not buying it's a big deal.  It's good that the tooling is getting a second life but the whole "Game Changer" for the hobby was wildly overstated.

All of MTH's tooling was available for sale. MTH's competitors purchased all they wanted leaving MTH with the tooling that no one wanted. No one could have imagined that Lionel and Atlas would own a portion of MTH just a couple of years ago. Now many of us who were interested in MTH's locomotives but hesitated because they did not come with TMMC/or Legacy can now look forward to owning and operating them with a command and control system that we are comfortable with.  Furthermore, we can purchase these former MTH locomotives with the peace of mind knowing  they  are backed by a warranty of a thriving and stable company.  And this process has only begun. It's a big deal.

@MartyE posted:

Is it possible that MTH still might be using some of the tooling and in doing so would lose sales if Lionel announced all of the tooling bought?  Just a thought.  I'm with you though other than if it's a contractual thing then spill all the beans.  The whole "Big Announcement" thing here was a to do about nothing IMO.

You may be exactly right on that Marty. In order to sell stuff like the tooling there could be certain agreements made right off the top. For example, let's say that MTH sold Lionel the Dreyfuss tooling. It could be that MTH may have said you'll get the tooling by December 2021, or maybe next year, or something like that, which would be why we aren't seeing things like that in this catalog(if that is to happen). Who can say for sure, but time may tell.

@KOOLjock1 posted:

I'll take the middle road:  it's a game changer to some of us.  Because of economics or just a love of simplicity, many chose an operating system and stuck with it.  That's why I'm still running TMCC 1 after all these years.  LionChief Plus gave me the opportunity to run the kinds of trains I like without investing in a new OS, so I adopted that too.

But that doesn't mean I didn't long for some of the traditionally-sized equipment in the M-T-H catalogs.  I just wasn't going to invest in DCS.

Now I can enjoy that equipment, and run trains my way.

Jon

Perfectly stated. Partially because this is me.

RE: The many comments up above. Game changer? Small potatoes? Big news or small news? Who cares? The point is that this is significant news for the hobby and I welcome it.

Last edited by johnstrains

Well again I'm happy to see the tooling get used.  Hopefully there is something more that would interest me like the new Amtrak engines do.  I'm happy for the folks that will benefit from it including Lionel.  While IMO it's still not that big deal I'm glad to see folks excited about it.  It's good for the hobby when folks get excited.  Let's hope Lionel makes the most of their new acquisitions.

Looking at it from Jon's perspective I can see why some folks feel it's a big deal.

Last edited by MartyE

During the LCCA presentation yesterday, Lionel stated that they had an opportunity to purchase any or all of the MTH tooling. Lionel spend sometime assessing the tooling and purchased, as they stated, a broad assortment of tooling. Whatever tooling MTH still have in their possession it is because no one else ( Lionel and Atlas) wanted it, not because MTH wanted to keep it.

Lionel also stated that not all of the tooling they have will be in today’s catalog. Okay he implication being that future catalogs will have other MTH products. This is a big deal.

Let's hope that the MTH subway sets for New York and Chicago were wanted by one of the other manufacturers so that they will live on in production.

As some have stated, the news yesterday affects all of us differently.

For some of us, having Lionel purchase MTH tooling is great news.  It shows that Lionel is willing to invest and they seem to have the money to do it.  That is definitely a positive.  MTH had many models of great locomotives (this is evident by all the prototypes that were in the Cabin Fever Auctions).  For Lionel to add Legacy, whistle steam, and Bluetooth to these engines means that many more people and generations will have access to 3-rail (and maybe 2-rail) models that continue to grow the imagination.

Others look at this as an end to MTH, or at least the MTH as we knew it.  Maybe it is, though at the same time the hobby is moving forward.  DCS still lives on, and we can look forward to what it evolves into.

Then there are those few who didn’t see this news as anything more then the same old stuff.  That is there opinion.  If those few don’t buy anything in the future from this news, then that is their choice.  I can only hope that they can find it in themselves to be happy for those who found this news to be great.  

The hobby is not dead.  The scale is not dead.  We are all going to continue enjoying it and running trains.

Last edited by Carl Peduzzi
@Hudson J1e posted:

Does anyone know what tooling was sold? I read this entire thread and I checked the Lionel website. I could not find the above catalog.

What we know and is in the catalog will be the wood passenger cars, these do excite me BTW, Amtrak Genisis, C Liners, MTH buildings, and fire trucks off the top of my head.

I'm sure there is more we will find out about in coming months but that is what I have seen.

As far as the end of MTH, they seem to be doing OK making the special runs.  I think they'll be fine.

Last edited by MartyE
@Hudson J1e posted:

Thank you Marty. I assume you mean the 1800's type passenger cars? Dang I wish I would have gotten one more set of those cars as I assume the price will go up but I am very happy I did get the Raritan River RR Version that Public Delivery Track offered.

Yep.  And yes the MSRP did go up.  I want to add 2 PRR to my MTH set.  I'm hoping they'll match in some incarnation.

BA886111-3F16-4DFE-B5E5-39ACA2046472

Attachments

Images (1)
  • BA886111-3F16-4DFE-B5E5-39ACA2046472
Last edited by MartyE

Thanks Marty. You never know you may find a set of NOS (New Old Stock) cars at a train meet or train store. One thing I still don't know in all the MTH selling this or that announcements is what is happening with the MTH separate sale trucks (both 3 rail and 2 rail) and the trucks MTH made to fit existing Weaver cars? Is the current MTH company keeping them or has the tooling for these trucks been sold to anyone?

Really cool picture by the way!

Last edited by Hudson J1e

Let's hope that the MTH subway sets for New York and Chicago were wanted by one of the other manufacturers so that they will live on in production.

Agreed.  I keep searching for more Chicago subways with PS2 or PS3.  If Lionel buys them, that era ends, too.  I know Lionel fans would love this but MTH fans find this to be the end of a truly great run.  I am grateful for my MTH collection and I see the value going up; yet I'm saddened because it makes me feel old, as I look forward to retirement like Mike Wolf.  Now I know how the post war Lionel folks must have felt when MPC became the new normal.

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×