I am looking into building Brick Pillars with Wrought Iron Fencing between them, I'd like to add lamps to the Pillars. I've done a lot of searching but haven't found anything. I'd like to find the Fixtures and add LED's to them. Any Ideas would be greatly appreciated.
Replies sorted oldest to newest
Check ebay and the Chinese suppliers.....I got some kinda like that but were side mount for a wall.
Thanks Dave. I may have to look into some HO street lamps and cut the Posts off.
MTH has that kind of style streetlamp. Would be a not to hard kitbash. 30-1062
Thanks Chuck I'll check it out, I'd like to be able to run them at 10 volts off my Z 4000. I'd rather not have to deal with dropping voltage down.
IIRC, Lemax once produced entire lighted fence/wall sections that plugged together to suit the length needed. Could maybe do a search of Lemax for a source.
Bruce
brwebster posted:IIRC, Lemax once produced entire lighted fence/wall sections that plugged together to suit the length needed. Could maybe do a search of Lemax for a source.
Bruce
I have a set of those....a little large for O but well done.
Thanks for the Replies Guys. I found some HO Lamp posts that are not lit which is perfect, I can add 1.8 mm warm white LED's from Evans Design that will run on the 10 Volt Accessory power from my Z4000.
The size should work well with 1/2 " square and 1.5" tall pillars.
I was dreading having to add resistors and Rectifiers to convert down to 3 Volts, I'm no electrical Wizard.
I'll post Photos when the project is done.
Access to this requires an OGR Forum Supporting Membership
