Lionel 140 banjo

@Scout3744 posted:

Hello,

I posted a reply on an old thread pertaining to the Lionel 140 banjo signal but it may not be active any longer. The question I have is with respect to the washers inside the drum. Is the drive washer (the one with three small “teeth”) cemented to the “brass” washer that is in front of the coil? I know that one of the washers is cemented to something but just not sure where. Thank you.

Try this

cs-6102709004

BASE CNTR STRCTRE ASY PNT

1

$.00

Unavailable

cs-6000140019

COIL ASSEMBLY

2

$9.10

Unavailable

cs-6102709039

CROSSING SIGN STP

3

$3.00

Unavailable

cs-6102709013

CVR STP BANJO SIGNAL

4

$2.00

<input class="qty-116665" data-ddg-inputtype="unknown" data-quantity-id="116665" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="116665" name="add.384498" type="button" value="Add" />

cs-6000140032

DRIVING WASHER / BANJO SIGNAL

5

$1.10

Unavailable

cs-6000140052

INSULATOR PLATE / MLD NYL

6

$.50

<input class="qty-101922" data-ddg-inputtype="unknown" data-quantity-id="101922" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="101922" name="add.384498" type="button" value="Add" />

cs-6008352600

LAMP / 18V 80MA / RED / ROUND / W/ADAPTER & SOCKET

7

$1.50

Unavailable

cs-6000140035

WASHER / LOCK / .100" ID

8

$.30

<input class="qty-101930" data-ddg-inputtype="unknown" data-quantity-id="101930" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="101930" name="add.384498" type="button" value="Add" />

cs-6000140028

OUTER CUP & PIN ASSY

9

$3.00

Unavailable

cs-6008960052

PALNUT / SPRING STEEL / PS125306

10

$.50

Unavailable

cs-6102709041

PENDULUM STP BANJO SIGNAL

11

$3.00

<input class="qty-116660" data-ddg-inputtype="unknown" data-quantity-id="116660" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="116660" name="add.384498" type="button" value="Add" />

cs-6000530040

RIVET / .120" DIAM x .220" DIAM x .156" LNTH

12

$.30

<input class="qty-101248" data-ddg-inputtype="unknown" data-quantity-id="101248" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="101248" name="add.384498" type="button" value="Add" />

cs-6107401022

SCREW # 4 x 3/8"

13

$.40

Unavailable

cs-6000348187

SCREW # 3-48 x 1/4"

14

$.30

<input class="qty-101622" data-ddg-inputtype="unknown" data-quantity-id="101622" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="101622" name="add.384498" type="button" value="Add" />

cs-6902020M09

SOLDER LUG / .144" ID

16

$.30

Unavailable

cs-6000256030

TERM CLIP & LUG T.PLT

17

$1.00

<input class="qty-101664" data-ddg-inputtype="unknown" data-quantity-id="101664" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="101664" name="add.384498" type="button" value="Add" />

cs-6012709SCP

MC BANJO SIGNAL SCP

$.00

<input class="qty-165053" data-ddg-inputtype="unknown" data-quantity-id="165053" id="qty_384498" name="qty.384498" type="text" value="1" /><input class="addItem" data-action="addingbasketdata" data-line-id="165053" name="add.384498" type="button" value="Add" />

cs-6712709250

INST SHT BANJO SIGNAL

$.00

Unavailable

Thank you. Actually, this diagram seems to show just one washer - there are two in my 140 signal. I still do not know if the drive washer should be cemented to the second washer in my case. I imagine it would have to be or it wouldn’t turn otherwise.

So here are some photos of mine.  Took it apart so you could see the rubber drive with the rubber fingers.  It is stuck, “glued” to the vibrotor with the adhesive washer(disk).  I had one go bad, when I peeled the rubber “drive” off the motor, you can see the glue drops on the adhesive washer.  That’s all there is to it, that I can see.  Hope this helps.

Hi TedW. These pictures help a lot. Thank you! I’m fairly sure I know what to do now. One thing that I need to do is replace the drive washer - that is worn to almost nothing.