Lionel 1688 E won't run in reverse

I have been fussing with my 1688 E no reverse here is what I believe the problem is.

The e-unit is missing the return spring so it will activate the reverse function, I have to reset position by hand so it will reverse. Because of this I changed the wiring so the it only runs in one position.

I took the e-unit out and cleaned the engine and have it working in forward position only. It looks like I Will need to get a new spring so it will run in reverse then rewire back to original

I can not find the spring part number can anyone help or tell me if I am completely off in my diagnosis of the problem

martyb

1/29/199:25 AM

❤️ 0

Original Post

Replies sorted oldest to newest

jim mcclainOGR Forum Member

I have a 1688E that I will not get a chance to work on for a while but I did look at it.It appears thet it is a vertical E unit and I don't think it has a spring it works by gravity like other e units of this type.You should bench test it take it out and hook up the coil to track power and see if it cycles.

1/29/1910:53 AM

❤️ 0

PopiOGR Forum Member

clean the drum in the e unit, worse case scenario you may have to replace the drum

and the two finger unit and the four finger unit. Make sure the plunger cycles freely

as sometimes it sticks in the tube.

1/29/1911:03 AM

❤️ 0

martybOGR Forum Member

Thanks guys for the information I will try the suggestions

Never thought of gravity

THANKS THE HELP YOU GUYS ARE GREAT AND VERY KNOWLEDGEABLE

martyb

1/30/1910:04 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!