Skip to main content

6 replies

Lionel 8615 Berkshire 2-8-4

B BReeceOGR Forum Member

I took the shell off, removed the motor (8002-100) added grease (red&tacky), the LHS showed how to remove the motor and grease the engine; this is not the first time I have added grease to the engine. Now the only thing that works is the smoke unit and it smokes like a tire fire, so I know there is a problem there, don’t have a clue what I did wrong but the engine will not work. The tender was not connected when I first tried to run the engine so I connected the tender, still the engine will not run.

When the two screws holding the motor are tighten hard the wheels will not turn, loosen the screws a tad and the wheels will turn. I took the engine out again to see if the gear on the end turned, it did not

 

All help will be appreciated.

 

Brent

Original Post

Replies sorted oldest to newest

B breezinupOGR Forum Member DIGITAL SUBSCRIBER
Originally Posted by BReece:

I took the shell off, removed the motor (8002-100) added grease (red&tacky), the LHS showed how to remove the motor and grease the engine; this is not the first time I have added grease to the engine. Now the only thing that works is the smoke unit and it smokes like a tire fire, so I know there is a problem there, don’t have a clue what I did wrong but the engine will not work. The tender was not connected when I first tried to run the engine so I connected the tender, still the engine will not run.

When the two screws holding the motor are tighten hard the wheels will not turn, loosen the screws a tad and the wheels will turn. I took the engine out again to see if the gear on the end turned, it did not

 

All help will be appreciated.

 

Brent

 

How about asking that LHS that showed you how to remove and grease the motor?

Last edited by breezinup
B BReeceOGR Forum Member
Originally Posted by breezinup:
Originally Posted by BReece:

I took the shell off, removed the motor (8002-100) added grease (red&tacky), the LHS showed how to remove the motor and grease the engine; this is not the first time I have added grease to the engine. Now the only thing that works is the smoke unit and it smokes like a tire fire, so I know there is a problem there, don’t have a clue what I did wrong but the engine will not work. The tender was not connected when I first tried to run the engine so I connected the tender, still the engine will not run.

When the two screws holding the motor are tighten hard the wheels will not turn, loosen the screws a tad and the wheels will turn. I took the engine out again to see if the gear on the end turned, it did not

 

All help will be appreciated.

 

Brent

 

How about asking that LHS that showed you how to remove and grease the motor?

The LHS died a week after I bought the engine.

Brent

j whitej whiteOGR Forum Member

Are you sure it's the smoke unit that is smoking. Perhaps there is a pinched wire in the area that is shorting out and smoking. This would prevent the current from reaching the motor, and would likely cause the breaker to trip on the transformer (possibly in 15 seconds or so?). 

 

Hope this helps,

 

J White

 

Add Reply

Views: 411
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×