Skip to main content

Fellas, I need some suggestions.  After 2 of my original Scaletrax switch machines burned up, I decided to go with more reliable switch and bought a couple of z-2500 switch machines from z-stuff.  The work like a charm.  However, I am having all sorts of difficulty trying to figure out how to modify the switch machines to work with my Scaletrax switches.  I have almost ruined one trying to super glue the magnetic switch arm to my new switch machine (not a good idea on hindsight).  Please, any suggestions would be extremely appreciated.  Pictures would help even more.  Thanks in advance for all help.

Original Post

Replies sorted oldest to newest

Adam,

 

I had the same dilemma as you. I ordered this 1/8" square tubing from Amazon. I cut it in 1/2" lengths and drilled a small hole in one end for the spring, then painted the tube black. On the other end, I inserted a small magnet to mate with the magnet in the switch throw arm. Watch the polarity so they attract rather than repel. The magnets I also ordered from Amazon, but I noticed they don't have them anymore. If you did a search on the name, they might have them by a different vendor.

 

Products from Amazon:

Plastruct STFS-4 Square Tubing, 1/8", Qty 7, PLS90621 (I paid $7.21)

Tiny Craft Hobby Neodymium Rare Earth Super Magnets 1/8 x 1/16 in. Qty 50 (I paid $3.99)

 

With the Z-2500 switches is the Atlas spring. That is the one I used. I glued the magnet in to the tubing with a dab of super-glue.

 

Here are some photos:

 

 

 

IMG_2964

IMG_2965

IMG_2967

IMG_2968

 

Let me know if you need more info.

George (G3)

Attachments

Images (4)
  • IMG_2964
  • IMG_2965
  • IMG_2967
  • IMG_2968

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×