New layout design

Ok, so I'm at work and I have decided that designing on a laptop is less than ideal. Let me know if something like this is more what you envisioned.

I will once again attach the XtrackCAD file.

Hey Darrell, sorry for the delayed response, got busy, My idea was to have a couple dead end sidings depending on the room I have, to layout a couple action accessories like log dump and milk can loader.  I thought of a corner mountain tunnel on the upper left on the outer loop, maybe a slight grade to it to give some height to the layouts.  the right side of the layout where you have multiple spurs is 32 " wide as is the table at the top is 32" also, however the left side along the window is only going to be 28" to stay away from the window shutters.  Ive started building my table units before I have a plan, that seems to work better for me although backwards, I can definitely start with the two loops O72 and O 60 and go from there. 

Nice, the table in front of the window will hold that passing siding, the outside rail of the inner most track is only 24" from the wall/window. All the track as shown will fit on 24" tables except the right side with the sidings which is right about 30".  I wanted a simple plan with room for scenery and stuff to show you what could be done and still have the wider curves to run that 054 loco on :-)

Let me know if you want me to help with your design, although just laying track out to see what fits works also.

Darrel Thanks I tried to download the rtrax on my PC without success, I will keep messing with it. Can you generate a parts list for fastrak from your design Ie: switch size and track inventory? If so can you send it because I’m gonna have to order new switches all I got now are O36.

Thks Tom T

Here you go!