Skip to main content

These are are photos of our 2nd layout. It is 8 x 16 with Atlas track min/max curve of 0-54 powered by Z-4000 running with DCS. The layout is in our basement. We are probably about 2 years into the layout. I am more surprised by my 12 year old son's patience(lol)!  He is the idea man, while I game plan and run the alleged budget that we have or don't have. hahaha. With all layouts there are somethings we wished we did or didn't do but, we will be wiser for the next one in the distant future.  We have Rail King engines Premier Engines and Lionel Legacy engines. We are from Long Island, so we have Lionel H16-44, Rail King 0-6-0 B Switcher, Rail King 2-8-0 Long Island Sunrise with passengers sets from Long Island and frieght. My sons favorite is the Rail King Sante Fe F3 while I prefer the Premier U30C CSX and the GP35 Burlington from Lionel. You can tell we use a lot of the same grass,trees and other supplies throughout the layout. (budget concerns)lol. 

  

Last edited by Michael Pellegrino
Original Post

Replies sorted oldest to newest

DoubleDAZ posted:

Mike, I like what you did with the landscaping here. Did you ever do anything with that 14x18 design we worked on back in early January?

We are still going through our plans for that. We are in no rush. We are about to finish this layout. Then we will set our goal on that 14 x 18 layout. The kid is really into it now because he sees that we are all most done with this layout.  

Mike

 

MarkStrittmatter posted:

Good morning, Nice layout.

I like the tank sitting I am going to assume a park.

I remember when I was a kid you seen this in many of the small towns here in PA.

That long street, I can see some Illegal drag racing going on Friday and Saturday nights !!!!

Something different,  again very nice.

I would not say a park. The Army Surplus Store is in the back ground, so we used it to show what the store has lol.  I also remember seeing tanks at small parks as memorials.  You have to have a little illegal drag racing going on right .

Mike

Yes the photos were here they have been taken off because I am in the process of being in another magazine. I was told by that magazine not to have any photos out there.  So if I am in the magazine I will let every one know then photos will go back up after the release. If I don't make the cut then photos will be back up when I am told I didn't make it.  My son is excited about this so lets see what happens, not bad for two novices though hahaha

 

 

CHARLES7777 posted:

I was wondering to my self what happen to the photos?

 

Charles,

I had to remove the photos because I will be published by another magazine in the near future. We are under contract so I had to remove the photos but, when we are published the photos will be back on.   So all can see what we have done!  

Thank you for the interest 

Mike 

Michael Pellegrino posted:
CHARLES7777 posted:

I was wondering to my self what happen to the photos?

 

Charles,

I had to remove the photos because I will be published by another magazine in the near future. We are under contract so I had to remove the photos but, when we are published the photos will be back on.   So all can see what we have done!  

Thank you for the interest 

Mike 

 Good luck bye hope you guys get in it 

CHARLES7777 posted:
Michael Pellegrino posted:
CHARLES7777 posted:

I was wondering to my self what happen to the photos?

 

Charles,

I had to remove the photos because I will be published by another magazine in the near future. We are under contract so I had to remove the photos but, when we are published the photos will be back on.   So all can see what we have done!  

Thank you for the interest 

Mike 

 Good luck bye hope you guys get in it 

Charles,

We will be published, I have a copy of the article and the photos they will be using. I just have to shoot a 5 minute video and make some minor corrections to the article and that is all she wrote.  When will it be published, I don't know.  Hopefully soon  

Happy New Year and thank you for interest,

Mike

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×