I HAVE A NEW BASIC FASTRAC LEGACY OVAL. A TERMINAL TRACK CONECTS IT TO MY ZW-L A-U OUTPUTS. MY LEGACY COMMAND BASE IS CONNECTED TO THE ZW-L BY A COMMUNICATION WIRE TO THE ZW=L POST. MY ONLY ASC2 IS CONNECTED TO THE ZW-L B-U OUTPUTS. A LIONEL ICE STATION IS CONNECTED TO THE ASC2 COMMON AND TERMINAL ONE. ALL OF THE PRODUCTS HAVE BEEN PROGRAMMED ACCORDING TO THE MANUALS. THE ZW-L A-U OUTPUT IS PROGRAMMED FOR MY LEGACY ENGINE #58. THEREFORE, THE B-U OUTPUT IS AUTOMATICALLY ENGINE #59. THERE IS NO ENGINE #59 BUT I PROGRAMMED THAT OUTPUT AS IF THERE WERE SUCH AN ENGINE. I INTEND TO USE OUTPUT B-U ONLY FOR ASC2 ACCESSORIES. OUTPUT A-U IS ALSO PROGRAMMED FOR TR #10 AND OUTPUT B-U FOR TR #11. THE REMOTE IS PROGRAMMED ACC ASC2 BASE #1 THE SAME AS THE ASC2 IS PROGRAMMED. WHEN I POWER UP THE B-U OUTPUT AND PRESS AND SET TR #11 ACC #1 AND TERMINAL #1 NOTHING HAPPENS. NO SOUND OR MOVEMENT OF THE ACCESSORY. THE ASC2 IS CONNECTED TO THE POWER TERMINALS ON THE ZW-L. HAVE I DONE SOMETHING WRONG OR FAILED TO DO SOMETHING?
Original Post
