PS3 Installtion Question

What's the product number of the engine your working on? 

Trainlover9943 posted:

What's the product number of the engine your working on? 

Do not know at the moment. It is the Premier UP Coal Turbine 1st unit. I am going to do both unit and operate as a lash up.

Open volume is full volume in conventional, but the smoke switch needs to be closed to have smoke on in conventional.  Why not use a switch since there should be plenty of them on that model?

As far as coupler trace the wire to pin location to be sure.  G

GGG posted:

Open volume is full volume in conventional, but the smoke switch needs to be closed to have smoke on in conventional.  Why not use a switch since there should be plenty of them on that model?

As far as coupler trace the wire to pin location to be sure.  G

Thanks for the reply.

Having many upgrades under my belt,   I tell everyone to read the book.   you seem to have read the book by my observations.    After you get the first hundred upgrades under your belt, you will know where every wire goes.  I see many self proclaimed experts that are above reading the book get in trouble.  The DCS upgrades are ok to do if you understand every step.  

Marty Fitzhenry posted:

Having many upgrades under my belt,   I tell everyone to read the book.   you seem to have read the book by my observations.    After you get the first hundred upgrades under your belt, you will know where every wire goes.  I see many self proclaimed experts that are above reading the book get in trouble.  The DCS upgrades are ok to do if you understand every step.  

I Agree Marty I do try and read the books. I did get to the point with PS2 up grades I could do them without the manual, but I always kept where I was working.  I only upgrade my Locomotives, I think I have done about 89 at this time. I have blown some boards. You learn by doing.

Thanks you all for your advise, and have a nice day!

Trains41