I have one complaint about the detail on the GGD RDCs. Scott forgot to include the exhaust stacks in the roof top blister. Instead there are just these blank panels where the stacks go.
Perhaps Scott would do the Phase 2 version of the RDC? This way he could do the railroads he didn't do on the first run.
Stuart
I have one complaint about the detail on the GGD RDCs. Scott forgot to include the exhaust stacks in the roof top blister. Instead there are just these blank panels where the stacks go.
Perhaps Scott would do the Phase 2 version of the RDC? This way he could do the railroads he didn't do on the first run.
Stuart
I have one complaint about the detail on the GGD RDCs. Scott forgot to include the exhaust stacks in the roof top blister. Instead there are just these blank panels where the stacks go.
Perhaps Scott would do the Phase 2 version of the RDC? This way he could do the railroads he didn't do on the first run.
Stuart
My friend has a New Haven unit, and on the top of blister where the exhaust stacks should be (between the front and rear radiators) are just these two blank panels.
Stuart
Dave, Mike is a no go and I have asked Scott several times if he will run them again. Time will tell. When I got out of the Navy, I rode them to get into Boston. I remember them to be smooth.
Hello Marty, did Mike Wolf say he was not going to make scale RDC cars? Very curious about that, if he is not that would be disappointing.
John
I'm not planning on buying much more motive power, but I would definately be interested in a set of RDC's.
My only issue would be since I model both the Reading and th B&O, which line would I buy? 
Jim
I have one complaint about the detail on the GGD RDCs. Scott forgot to include the exhaust stacks in the roof top blister. Instead there are just these blank panels where the stacks go.
Perhaps Scott would do the Phase 2 version of the RDC? This way he could do the railroads he didn't do on the first run.
Stuart
My friend has a New Haven unit, and on the top of blister where the exhaust stacks should be (between the front and rear radiators) are just these two blank panels.
Stuart
Ah, OK. Thanks, Stuart.
Bob Bubeck
I just dug out of a box a clear plastic molding of an RDC-1, with an included metal
frame. I used to see these occasionally and thought I would find another, splice
them, and get my scale length RDC-3. Haven't seen others lately, but notice this
has no stacks but two round radiator grilles on the dome in the casting. The windows are not punched out, it is all one piece clear plastic, and I think this is an AMT/KMT molding?
Somebody on here was interested in AMTRAK. In some box, I didn't find, I have a pair
of AMT/KMT F units that someone had had, looks professional, repainted for AMTRAK.
I am staying steam only, so I have no use for these F units. (nor for the RDC-3, except it has been a challenge to get)
Access to this requires an OGR Forum Supporting Membership
